0
0

Redding Type S Bushing Neck Die 223 Rem – 71111 Neck Sizer

UPC: 611760711114

$75.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Type S Bushing Neck Die for 223 Remington gives handloaders a precise way to control case neck size and tension without overworking the brass. Instead of a fixed sizing diameter like a standard neck die, this one accepts interchangeable bushings sold in .001 inch increments, so you can set up the die to match the exact neck wall thickness of the brass you're running. That control is what separates good ammo from the kind that chews up groups at distance.

How the Type S Neck Die Earns Its Keep

The bushing floats slightly in the die, which lets it self-center on the case neck as it comes up. That self-alignment is the secret to better concentricity and less runout, and it's a big reason precision guys reach for this setup. The adjustable decapping rod lets you position the bushing to size only part of the neck length if you want, a trick that often tightens up accuracy on bolt guns. The die body uses the industry-standard 7/8-14 thread, so it drops into any common single-stage or progressive press, and a lock ring comes along to hold your setting.

Picking a Bushing for Your 223 Brass

Since bushings aren't included, you'll want to grab the right size separately. The simple method is to measure the outside neck diameter of a loaded round with a good micrometer and subtract about .001 to .002 inch. That gives you the spring-back room to land on proper neck tension for bullet seating. Bushings come in heat-treated steel or titanium nitride, the latter being easier on brass during sizing.

Two Ways to Run the 223 Type S Bushing Die

The decapping rod ships with a standard size button, which is handy if you're loading commercial brass as-is with no neck turning. If you sort or turn your necks for uniformity, pop in the included decapping pin retainer and run the die without the size button for the cleanest, most consistent results. Either way, this die is a straightforward upgrade for anyone chasing tighter groups out of their 223.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 71111
  • UPC: 611760711114
  • Caliber: 223 Remington
  • Die Type: Type S Bushing Neck Sizing Die
  • Bushing Increments: .001 inch
  • Thread: 7/8-14
  • Material: Case Hardened Steel
  • Standard Shellholder: #10
  • Bushings: Sold separately (not included)
  • Shellholder: Sold separately (not included)
  • Country of Origin: United States

What’s Included

  • Redding Type S Bushing Neck Sizing Die
  • Decapping rod with standard size button
  • Decapping pin retainer
  • Spare decapping pin
  • Lock ring
  • Storage box
  • Instructions

Frequently Asked Questions

Are bushings included with the Type S Bushing Neck Die?

No, bushings are sold separately so you can match the exact amount of neck sizing to your brass. They come in .001 inch increments in either heat-treated steel or titanium nitride. A shellholder is also not included and will need to be purchased separately.

How do I know what bushing size to order for my 223 loads?

Measure the outside neck diameter of a loaded round with a precision micrometer, then subtract about .001 to .002 inch. That difference accounts for brass spring-back and gives you proper neck tension for seating the bullet. Since neck wall thickness varies by brass brand and lot, it pays to measure your own cases.

Will this die fit my reloading press?

Yes. The Redding Type S Bushing Neck Die uses the standard 7/8-14 thread, so it works in any common single-stage or progressive press. A lock ring is included to hold your adjustment.

Do I need to neck turn my brass to use this die?

Not at all. For commercial brass loaded as-is, run the included standard size button for consistent inside neck diameter. If you sort or turn your necks for uniformity, swap in the decapping pin retainer and run the die without the button for the most consistent tension.

Additional information

UPC

611760711114

Manufacturer

Manufacturer Part Number

71111

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Neck Die 223 Rem – 71111 Neck Sizer”