0
0

Redding Type S Bushing Neck Sizing Die 220 Swift – 71107

UPC: 611760711077

$69.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload the 220 Swift and you're chasing tighter groups, neck tension is one of those details that separates good ammo from great ammo. The Redding Type S Bushing Neck Die gives you direct control over it. Instead of a one-size-fits-all expander, this die uses interchangeable sizing bushings in .001-inch increments, so you choose exactly how much your necks size down based on your brass and the bullet grip you're after.

What Sets the Type S Bushing Neck Die Apart

The bushing itself floats and self-centers on the case neck as it sizes, which does wonders for concentricity and keeps bullet runout low. That's the whole point of a setup like this: straighter ammo that chambers consistently and shoots to the same place. The adjustable decapping rod is another nice touch. You can position the bushing to size only part of the neck length if you want to leave a little unsized brass near the shoulder for better chambering and alignment.

Flexible Setup for Your Brass

The die comes with a standard size button on the decapping rod, which is the way to go if you're running factory or commercial brass as-is. It cleans up the inside of the neck as the case comes out of the die. If you turn or sort your necks for uniform wall thickness, you can swap in the included decapping pin retainer and skip the button entirely, letting the bushing do all the sizing work on its own.

This is a 220 Swift die built on standard 7/8-inch by 14 threads, so it drops right into single-stage, turret, and progressive presses from the major brands. It uses a #4 shellholder and works with .224 diameter bullets. Keep in mind the bushings are sold separately so you can pick the exact size your load calls for, and if you're not sure, going about .003 inch under your loaded neck diameter is a safe starting point when running unturned brass.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 71107
  • UPC: 611760711077
  • Caliber: 220 Swift
  • Die Type: Type S Bushing Neck Sizing Die
  • Bullet Diameter: 0.224 in
  • Thread Size: 7/8"-14
  • Shellholder: #4 (sold separately)
  • Bushing Increments: .001 in (bushings sold separately)
  • Material: Heat-treated steel
  • Quantity: 1 die

What’s Included

  • One Redding Type S Bushing Neck Sizing Die
  • Complete decapping rod assembly with standard size button
  • Decapping pin retainer (for neck-turned brass)
  • Die box
  • Instructions

Frequently Asked Questions

Do bushings come with the Type S Bushing Neck Die for 220 Swift?

No, the bushings are sold separately. That's by design, since it lets you pick the exact bushing diameter your brass and load call for. Bushings are available in .001-inch increments, and a good starting point for unturned factory brass is about .003 inch under your loaded neck diameter.

Will this die fit my reloading press?

Yes. The Redding Type S Bushing Neck Die uses standard 7/8-inch by 14 threads, so it fits single-stage, turret, and progressive presses from all the major manufacturers. You'll want a #4 shellholder for the 220 Swift, which is sold separately.

What's the difference between this neck die and a full-length bushing die?

This Type S Bushing Neck Die sizes only the case neck and leaves the body alone, which is ideal for brass fired in the same rifle and great for extending case life. A full-length version sizes the body and bumps the shoulder in addition to the neck. If you neck size exclusively, plan to full-length size or use a body die occasionally to keep chambering smooth.

Can I use this die with neck-turned brass?

Absolutely. Swap in the included decapping pin retainer in place of the standard size button and let the bushing handle all the sizing. That setup is the preferred route for anyone who turns or sorts their necks for uniform wall thickness and maximum concentricity.

Additional information

UPC

611760711077

Manufacturer

Manufacturer Part Number

71107

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Neck Sizing Die 220 Swift – 71107”