$170.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you picked up a Hellcat because it's the most capacious micro-compact 9mm on the market, you might be thinking about what comes next. True Precision makes the logical upgrade path simple with this threaded barrel for the standard 3.1-inch Hellcat. Installation takes minutes, no gunsmithing needed.
The stainless steel construction uses 416R material, a premium choice for barrel makers. The rifling isn't stamped or mass-produced the typical way. True Precision broach-cuts each barrel individually, which is labor-intensive but produces tighter bore tolerances and more consistent performance shot after shot. The threads come cleaned and chamfered so accessory attachment is smooth. A Viton O-ring lock thread protector ships with the barrel to keep the threads protected when you're not running a suppressor or compensator.
Beyond just adding threads, True Precision spent time on the little details that add up. The feed ramp geometry is improved from the factory design, with wider ramps and better radius cuts that work with all ammunition types. The chamber is SAAMI spec. The crown is cut with a special deep target profile to protect it from damage. These aren't marketing buzzwords, they translate to real-world reliability with everything from light 115-grain loads to heavier 147-grain rounds, and they handle cast lead bullets cleanly due to the engineering put into the feed area.
This model comes with a satin stainless finish that resists corrosion without adding unnecessary color. The 1/2 by 28 threading is the standard for micro and compact suppressors and compensators, so you have plenty of options when it comes to what you want to mount. The overall length with the thread protector attached is 3.85 inches. The 1:10 right-hand twist rate locks in the factory rifling profile, proven reliable in the platform. Installation is straightforward on the Hellcat, and the drop-in design means no fitting or headspace checks needed.
No, this barrel is designed specifically for the standard 3.1-inch Hellcat models. The Hellcat Pro uses a 3.7-inch platform and requires a different barrel. True Precision does make a separate threaded barrel for the Pro model, so make sure you get the right one for your platform.
You do not need gunsmithing tools or headspace gauges. It's a drop-in design that goes straight into the slide with no modifications or fitting. Some people use a small pin punch or armorer's block to help seat the link pin, but most install it with the factory disassembly and reassembly process.
Yes, the 1/2×28 threading is standard and works with most aftermarket mini and micro compensators and suppressors in that thread pattern. It is also notched for compatibility with the Hellcat RDP compensator if you want to keep that option open.
True Precision individually broach-cuts each barrel rather than using mass-production methods. This process produces tighter bore tolerances and more consistent rifling from barrel to barrel. The result is improved accuracy potential and the ability to safely shoot all ammunition types including cast lead, which can sometimes have issues in standard barrels.
| UPC | 719104539438 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TPSHCBXT |
| Length | 3.10" |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.