$56.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The True Precision Y-Type Micro Compensator is a small muzzle device with a big job: cutting down the snap and rise on your threaded 9mm so you can get back on target quicker. It threads onto 1/2×28 barrels and does its work through a multi-port design, with three slotted 90-degree ports and a tapered front crown that route gas up and out away from the muzzle. That copper PVD finish isn't just for looks either, though it does pair nicely with matching True Precision barrels and slides for a build that ties together.
What sets these micro comps apart is the radial expansion built into the body, which creates a small chamber ahead of the muzzle. Gas gets trapped in that chamber and vented through ports at the 12, 3, and 9 o'clock positions instead of leaking out in every direction. The result is less muzzle climb and smoother cycling, which shooters running guns like the P365XL have noticed as easier dot acquisition and quicker follow-ups. It works especially well on carry-size and compact pistols where every bit of control counts.
Each comp is machined from USA-sourced solid 416R stainless steel bar stock and designed, assembled, and finished stateside. It measures about .787 inches long and around .745 inches at its widest, tapering down toward the barrel end, so it keeps a low profile that still carries comfortably. A tension lock O-ring lets you install it hand-tight and helps keep it from backing off during a range session. It's dialed in for True Precision barrels but plays nice with most 9mm and .380 ACP pistols wearing 1/2×28 threads.
Installation is about as simple as it gets since there's no timing to fuss with. Thread it on, snug it down against the O-ring, and if you want extra insurance against walking loose over a long day of shooting, a dab of medium-hold thread locker will hold it in place.
It's built for barrels with 1/2×28 threads chambered in 9mm or .380 ACP. It's designed specifically around True Precision barrels but works on most threaded 9mm and .380 pistols with that same thread pitch. If you're running a common threaded barrel on a P365, Glock, or similar, you should be good to go.
No timing required. The port pattern works regardless of clock position, so you just thread it on and snug it down against the tension lock O-ring. Installation is about as simple as it gets, with no gunsmith visit needed for most setups.
It does. The radial chamber traps gas and vents it up and out through ports at the 12, 3, and 9 o'clock positions, which cuts down muzzle climb and felt recoil. Shooters running compact pistols report less snap and quicker sight recovery for faster follow-up shots.
The tension lock O-ring is there to keep it hand-tight and fight back-off during a range session. Over a long, high-round-count day some folks like a little extra insurance, so a dab of medium-hold thread locker will lock it down for a semi-permanent hold.
| UPC | 719104540953 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TPYMICROC |
| Caliber/Gauge | 9mm |
| Color | COPPER |
| Model | |
| Product Type | Compensator |
| Thread Pattern | 1/2"x28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.