Description
The True Precision S-Type Micro Compensator does one thing and does it well: it tames muzzle flip on threaded 9mm and .380 pistols so your sights settle back on target faster. It threads onto 1/2×28 barrels and stays compact enough that it doesn't feel like you bolted a chunk of steel to the end of your carry gun. If you've ever fought a snappy little P365 or Hellcat between shots, this is the kind of upgrade that makes practice more fun and follow-ups quicker.
What the S-Type Micro Comp Does at the Muzzle
The design uses three slotted ports paired with a tapered front crown that redirect gas up and away from the muzzle. That gas venting is what pushes the front of the gun down and cuts felt recoil. It's cut for a 1/2×28 thread pitch, so it drops onto most 9mm and .380 barrels wearing that pattern, and it's originally built to pair with True Precision's own threaded barrels for a matched look.
Built From Solid Stainless, Made in the USA
This one is the satin stainless finish, machined from USA-sourced solid stainless bar stock and made stateside. The satin finish keeps it low-key and pairs nicely with a stainless slide or barrel if you're going for a matched build. The whole thing runs right around .787 inches long and stays narrower than the slide on popular micro-compacts like the P365, Glock 43, and Shield, so the bulb-style profile draws clean from open-ended holsters.
Getting the S-Type Micro Compensator Dialed In
Installation is about as simple as muzzle devices get. Slide the included high-heat tension O-ring over the threads, hand-tighten the comp with the ports pointing up, and you're set. The O-ring keeps it from walking loose under fire, though plenty of folks add a dab of medium-strength thread locker for peace of mind if they don't plan to pull it for cleaning often. Users regularly report noticeably flatter shooting and smoother, easier follow-up shots once it's on, which is exactly what a comp this size is meant to deliver.
Key Specifications
- Manufacturer: True Precision
- Model: Micro Compensator S-Type
- Manufacturer Part Number: TPSMICROSS
- UPC: 719104540687
- Thread Pattern: 1/2"x28
- Caliber: 9mm / .380 ACP
- Material: 416R Stainless Steel
- Finish: Satin Stainless
- Port Design: Three slotted ports with tapered front crown
- Overall Length: 0.787 in
- Outside Diameter: 0.745 in (widest), tapering to 0.650 in
- Country of Origin: Made in USA
What’s Included
- True Precision S-Type Micro Compensator (satin stainless)
- High-heat tension lock O-ring
Frequently Asked Questions
Will the S-Type Micro Compensator fit my pistol?
It's threaded 1/2×28, so it fits most 9mm and .380 ACP barrels wearing that thread pitch. It was originally designed to pair with True Precision threaded barrels but works across a wide range of aftermarket and factory threaded barrels. Just confirm your barrel is 1/2×28 before ordering.
Do I need a gunsmith to install this comp?
For most setups, no. You slide the included high-heat O-ring over the threads and hand-tighten the comp with the ports facing up. The O-ring provides tension to keep it from backing off, though a gunsmith or a dab of medium-strength thread locker is a smart call if you want it locked in permanently.
Should I use thread locker with the O-ring?
The tension O-ring alone keeps the comp hand-tight and resists backing off under fire. Many owners run it O-ring only so it's easy to remove for cleaning, checking tightness periodically after range sessions. If you'd rather set it and forget it, a medium-strength removable thread locker like Vibra-Tite or blue Loctite works well.
Does the Micro Compensator actually reduce recoil?
Yes. The three slotted ports and tapered crown vent gas upward to push the muzzle down, which cuts felt recoil and muzzle flip. Owners consistently note flatter shooting and quicker, smoother follow-up shots on snappy micro-compacts like the P365 and similar 9mms.





Reviews
There are no reviews yet.