$47.49
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The True Precision S-Type Micro Compensator is built for folks running a 1/2×28 threaded pistol who want to knock down muzzle flip without bolting a giant device onto the end of their gun. It measures right around .787 inches long with an outside diameter tapering from .745 down to .650 at the barrel end, so it stays low-profile and carry-friendly instead of adding a bunch of length up front. It's cut for 9mm and works with .380 ACP as well, making it a flexible upgrade for a lot of common threaded barrels.
The magic here is the porting. The S-Type uses three slotted 90-degree ports paired with a tapered front crown that redirects propellant gas up and away from the muzzle. That combination pushes the front of the gun down as it recoils, which flattens muzzle rise and cuts felt recoil so your sights settle back on target quicker. If you shoot fast splits or just want a smoother, more controlled feel, that's exactly what this little comp is chasing.
This one is machined from solid stainless bar stock and wears a black nitride finish that resists wear and gives it a clean, understated matte look. It's designed, assembled, and machined in the USA, and True Precision backs their parts with a limited lifetime warranty against defects. The black nitride also pairs nicely with a blacked-out slide or threaded barrel if you're building out a cohesive setup.
Installation is refreshingly simple. It ships with a tension lock O-ring that lets you snug it down hand-tight and keeps it from backing off under recoil, so no special tools are required to get running. It was built with True Precision barrels in mind but fits most 9mm and .380 pistols wearing 1/2×28 threads. Keep in mind that adding a comp can change how your pistol cycles, so a little tuning with your recoil spring or ammo may help it run its best.
It fits most 9mm and .380 ACP pistols with a 1/2×28 thread pitch. It was designed specifically around True Precision barrels but works with a wide range of common threaded barrels. Just confirm your barrel is threaded 1/2×28 before ordering.
No, installation is straightforward. It comes with a tension lock O-ring that lets you thread it on hand-tight and keeps it from backing off under recoil, so no special tools are needed. Many people set it up themselves in a few minutes.
It can. Compensators redirect gas and can affect the timing of how the slide cycles, so you may want to experiment with your recoil spring, lubrication, or ammunition to get everything running smoothly. It's a common adjustment when adding any comp to a pistol.
It's machined from solid stainless steel bar stock and finished in black nitride for wear and corrosion resistance. It's designed, assembled, and machined in the USA, and True Precision backs it with a limited lifetime warranty against defects.
| UPC | 719104540717 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TPSMICROBL |
| Caliber/Gauge | 9mm |
| Color | Black |
| Length | 4.6500 |
| Model | |
| Product Type | Compensator |
| Thread Pattern | 1/2"x28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.