0
0

True Precision Micro Compensator S-Type 1/2×28 9mm Gold

UPC: 719104540694

$47.49

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The True Precision S-Type Micro Compensator is a compact muzzle device built to knock down felt recoil and keep the front sight flat on threaded 9mm and .380 pistols. It uses a three-port design with slotted 90-degree ports and a tapered front crown that redirect gas away from the muzzle, so your dot or sights settle faster between shots. The gold titanium nitride finish gives it a bright, eye-catching look that pairs nicely with matching True Precision barrels and slides, though it plays well with just about any threaded setup.

What Sets the S-Type Micro Comp Apart

This one is machined from USA-sourced solid stainless steel bar stock and designed, assembled, and machined right here in the States. It fits any barrel with 1/2×28 threads, so while it was engineered around True Precision barrels, you can run it on most 9mm and .380 pistols with that thread pitch. At right around an inch long and well under an ounce, it adds almost nothing to your slide profile, which is a big deal on a carry or competition gun where you don't want a bulky comp hanging off the end.

Getting the Micro Compensator On Your Barrel

Installation is about as painless as it gets. It ships with a tension lock O-ring that lets you hand-tighten the comp and keeps it from backing off under recoil, so you don't need to fuss with pin-and-weld work or a shop visit to get it running. If you prefer a more permanent setup, a dab of medium-strength thread locker does the trick.

A couple of real-world notes worth knowing: adding a comp can change how your pistol cycles, so you may need to tune your recoil spring, ammo, or lubrication to keep things running clean, especially on lighter-recoiling loads. That's normal for any comp, not a knock on this one. Once it's dialed in, the S-Type earns its keep with noticeably softer muzzle behavior and quicker recovery, all backed by True Precision's limited lifetime warranty against defects.

Key Specifications

  • Manufacturer: True Precision
  • Model: Micro Compensator S-Type
  • Manufacturer Part Number: TP-SMICRO-G
  • UPC: 719104540694
  • Product Type: Compensator
  • Caliber: 9mm / .380 ACP
  • Thread Pattern: 1/2×28
  • Color/Finish: Gold (Titanium Nitride)
  • Material: USA-Sourced Stainless Steel
  • Port Design: Three slotted 90-degree ports with tapered front crown
  • Retention: Tension lock O-ring for hand-tight install
  • Country of Origin: Made in USA
  • Warranty: Limited Lifetime

What’s Included

  • True Precision S-Type Micro Compensator (Gold)
  • Tension lock O-ring

Frequently Asked Questions

Will the S-Type Micro Compensator fit my pistol?

It fits any barrel with a 1/2×28 thread pitch, which covers most threaded 9mm and .380 pistols. It was designed around True Precision barrels but works on most standard 1/2×28 threaded barrels. If your barrel isn't threaded, you'll need a threaded barrel before you can run this comp.

Do I need a gunsmith to install the Micro Compensator?

No, installation is straightforward and can be done by hand. It comes with a tension lock O-ring that lets you thread it on hand-tight and keeps it from backing off under recoil. If you want a semi-permanent hold, you can add a dab of medium-strength thread locker.

Does adding this compensator affect how my pistol cycles?

It can, and that's true of any comp. Redirecting gas at the muzzle changes the pressure dynamics, so you may need to adjust your recoil spring, ammunition, or lubrication to keep the gun running reliably. Lighter loads tend to be more sensitive, so plan on a little tuning to get it dialed in.

What's the difference between the S-Type and Y-Type Micro Compensator?

Both share the same core design with three slotted ports and a tapered front crown to cut felt recoil, and both use the same tension lock O-ring install. The difference comes down to the port cut pattern and the look each one gives your muzzle. Choosing between them mostly comes down to which style you prefer visually.

Additional information

UPC

719104540694

Manufacturer

Manufacturer Part Number

TPSMICROG

Caliber/Gauge

9mm

Color

Gold

Length

4

Model

Product Type

Compensator

Thread Pattern

1/2"x28

Reviews

There are no reviews yet.

Be the first to review “True Precision Micro Compensator S-Type 1/2×28 9mm Gold”