$180.49
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Slap this into your Glock 43 or 43X and you get a real step up over the factory barrel without touching a single tool beyond your fingers. True Precision builds these things just outside Atlanta from certified 416R stainless billet, and the drop-in fit is what makes them so easy to live with. Pop the OEM barrel out, drop this one in, and you are back at the range. It runs the same in both the G43 and the slightly longer G43X, so if you shoot both you are covered.
The accuracy story comes down to how it is cut. This barrel uses True Precision's proprietary broach-cut 6-groove rifling with a 1:10 twist, which does a nice job stabilizing standard 9mm loads for tighter, more repeatable groups. Up front there is an 11-degree competition-style target crown that protects the muzzle and keeps your shots consistent. The chamber is a fully supported SAAMI-spec design, and the feed ramp has been widened and polished for smoother feeding across a range of ammo, including hollow points for carry.
That brilliant gold color is titanium nitride, a hard ceramic coating applied through physical vapor deposition. It is not just for show. TiN is harder than the base steel and naturally slick, so carbon and fouling do not cling to it the way they do to bare steel. That means smoother cycling and cleanup that is often just a wipe with a rag. It also pairs beautifully with a black slide for that classic two-tone build a lot of folks are after.
Bottom line, it is an American-made barrel that adds accuracy, easier maintenance, and a serious dose of curb appeal to a carry-sized Glock. Whether you are chasing better groups or just want your 43 to look as good as it shoots, this one earns its keep.
Yes. This barrel is designed to drop into both the Glock 43 and the Glock 43X in 9mm. It is a direct-fit replacement, so no gunsmithing or fitting is required. Just remove your factory barrel and slide this one in.
It is a genuine drop-in design. True Precision machines these to work with your existing slide and frame without hand fitting, and the improved fit is actually tighter than most OEM barrels. If you can field strip your Glock, you can install this barrel in a couple of minutes.
The titanium nitride coating is hard and very durable, but like any finish you may see light wear marks at high-contact points such as the barrel hood after a lot of use. That wear is purely cosmetic and does not affect accuracy or how the barrel feeds. The coating is thin enough that it will not change chambering or dimensions.
Absolutely. The feed ramp is widened and polished specifically to improve feeding of hollow-point and defensive loads, which makes it a solid choice for a carry gun. It is chambered for standard 9mm Luger service rounds. As always, run a few boxes of your chosen carry ammo to confirm reliability before you trust it.
| UPC | 719104534426 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TP-G43B-XG |
| Caliber/Gauge | 9mm |
| Color | Gold |
| Length | 6.6500 |
| Product Type | Barrel |
| Sights | No |
You must be logged in to post a review.
Reviews
There are no reviews yet.