Description
Troy built the X-Series Battlerail for the crowd that wants a long, lightweight forend without the clubby feel of a full quad rail. At 15.125 inches it stretches out over a rifle-length gas system or a longer barrel, giving you plenty of room to run your support hand way out front for better control. The whole rail tips the scales right around 9.8 ounces, which is featherweight for something this long, and the slim profile means it won't hang up on gear, slings, or door frames.
What Sets the X-Series Battlerail Apart
Troy took a different approach here by ditching the full-length top rail and machining M-LOK slots straight into the top panel. That drops weight and keeps the top of your rifle clean and low. You still get four 1913 Picatinny slots at the muzzle end and two back at the receiver, so there's dedicated hard-mount space for a front sight, a night vision device, or a bolt-on optic riser when you need it. Open cuts along the body let heat bleed off the barrel during long range sessions, which matters when the round count climbs.
Mounting the Troy X-Series to Your Build
No proprietary barrel nut headache here. The X-Series clamps to any mil-spec AR-15 or M4 barrel nut using Troy's quad-clamp system, which locks the rail down tight so your mounted lights and lasers hold zero. Mounting hardware comes in the box, and installation is straightforward with a standard 5/32 allen wrench. Just keep in mind the low-profile design means you'll want to run a low-profile gas block that fits under the tube.
Built Tough in Tennessee
Every X-Series rail is machined in Clarksville, Tennessee from American-sourced 6061-T6 extruded aluminum and finished in Type III hard-coat anodizing. Four anti-rotation, quick-detach sling swivel sockets are built right into the rail, so you can clip in a QD sling without buying extra hardware. It's a rugged, no-nonsense forend that holds up to hard use.
Key Specifications
- Manufacturer: TROY Industries
- Manufacturer Part Number: SRAI-SR1-15BT-X2
- UPC: 810038642598
- Rail Length: 15.125 inches
- Platform: AR-15 / M4
- Mounting System: M-LOK top panel with 4x 1913 Picatinny slots at muzzle, 2x at receiver
- Attachment: Quad-clamp to mil-spec barrel nut
- Material: American-sourced 6061-T6 extruded aluminum
- Finish: Type III hard-coat anodized, black
- Weight: Approx. 9.8 oz (0.61 lbs)
- Sling Mounts: Four anti-rotation QD sling swivel sockets
- Made In: Clarksville, TN, USA
What’s Included
- Troy X-Series 15.125" M-LOK Battlerail handguard
- Quad-clamp mounting hardware
Frequently Asked Questions
Does the Troy X-Series need a special barrel nut?
No. The X-Series uses Troy's quad-clamp system that mounts to any standard mil-spec AR-15 or M4 barrel nut, so there's no proprietary nut to source. That clamp locks the rail down firmly to help your rail-mounted gear hold zero. Mounting hardware is included in the box.
Can I still mount a front sight if the top rail is missing?
Yes. Troy removed the full-length top rail but kept four 1913 Picatinny slots at the muzzle end and two back at the receiver. That gives you dedicated hard-mount space for a folding front sight, a night vision setup, or an optic riser, while the rest of the top panel runs M-LOK to save weight.
Will this 15.125" X-Series handguard work with my gas system?
The 15.125-inch length is best suited to a rifle-length gas system or a longer barrel where the tube can clear the gas block. Because of the slim profile, you'll want a low-profile gas block that fits under the rail rather than a tall front sight base. Measure your barrel and gas block height before ordering to be sure of a clean fit.
How much does the X-Series Battlerail weigh?
It comes in right around 9.8 ounces, or about 0.61 pounds, which is very light for a rail this long. That's a big part of the appeal for anyone chasing a fast-handling, front-heavy-free build. The open cuts and M-LOK top panel are where a lot of that weight savings comes from.





Reviews
There are no reviews yet.