Description
If you already run an RCBS Trim Pro 3-Way Cutter, this is the piece that lets you point it at .22 caliber brass without buying a whole new cutter head. It's a caliber-specific pilot and chamfer tool machined from steel, built to drop into the 3-Way Cutter and handle cases in the .223 to .224 range. Swap the pilot, tweak your blade setting, and the same cutter head you already own is ready for a different caliber. For anyone loading .223 Remington, 5.56, .22-250, or similar, this is the quick, inexpensive way to expand what your trimmer can do.
What the 22 Cal Pilot Brings to Your Bench
The magic of the 3-Way system is that it trims, chamfers, and deburrs in a single pass. The pilot's job is to center the case on the cutter so every blade meets the brass squarely. That means your trim length stays repeatable and your inside and outside edges come out clean and even, which is exactly what you want when you're prepping a big pile of rifle brass and don't feel like touching each case three separate times.
Fitting the 90258 Pilot and Chamfer
This unit is designed to fit RCBS Trim Pro 3-Way Cutter heads. Keep in mind the cutter head itself is the main tool, and this pilot is the caliber conversion piece that goes with it. If you've got the 3-Way Cutter and want to add .22 caliber to your lineup, you replace the pilot and adjust the trimmer blades to match. Reloaders who work across several calibers usually keep a drawer of these pilots on hand so they can jump from one cartridge family to the next in a minute or two.
RCBS has been making reloading gear in the USA for decades, and the Trim Pro accessories hold up to serious volume. It's a small part that pulls real weight at the loading bench.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 90258
- UPC: 076683902580
- Caliber: .22 Caliber (.223/.224)
- Material: Steel
- Type: Caliber-Specific Pilot and Chamfer
- Fits: RCBS Trim Pro 3-Way Cutter heads
- Quantity: 1
- Country of Origin: USA
What’s Included
- RCBS Trim Pro 3-Way Pilot/Chamfer, .22 Caliber (one piece)
Frequently Asked Questions
Does the 22 Cal 3-Way Pilot/Chamfer include the cutter head?
No. This is the caliber-specific pilot and chamfer piece only. It's meant to be used with an RCBS Trim Pro 3-Way Cutter head, which is sold separately. If you already own the cutter, this is all you need to run .22 caliber brass.
What calibers does the .22 pilot cover?
It's built for .22 caliber cases in the .223 to .224 range, so it handles popular loads like .223 Remington, 5.56 NATO, .22-250, and other cartridges using that bore size. You still set your trim length for the specific case you're loading.
How do I switch my 3-Way Cutter to this caliber?
You replace the existing pilot with this .22 caliber unit and then adjust the trimmer blades to match. That's the whole appeal of the system. One cutter head plus a set of pilots lets you move between several calibers without buying duplicate tools.
Will this fit all RCBS Trim Pro trimmers?
This pilot is made to fit RCBS Trim Pro 3-Way Cutter heads, which install on RCBS Trim Pro case trimmers. As long as you're running the 3-Way Cutter setup, this pilot drops right in.



Reviews
There are no reviews yet.