$121.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
When you thread a can onto your Smith & Wesson M&P, standard sights disappear behind the suppressor body and leave you guessing. These Trijicon Bright & Tough suppressor-height sights fix that. The taller front blade and rear notch sit up high enough to give you a clean, properly aligned three-dot picture right over the top of your suppressor, and the green tritium lamps keep that picture visible when the sun goes down. No batteries, no switches, just a glow that's always working.
This set fits the S&W M&P C.O.R.E., M&P M2.0 Optics Ready, and M&P M2.0 Metal Series. The front blade sits at 0.311 inches and the rear at 0.402 inches, which is the extra height you need to see over most pistol cans or to run these as backup irons behind a slide-mounted optic like the Trijicon RMR. That co-witness ability is a big reason folks reach for suppressor-height sights even if they're not running a suppressor day to day.
Trijicon didn't skimp on the build. Each tritium lamp lives inside a protective aluminum cylinder, cushioned by silicone rubber so it can take hard recoil without cracking. The lamp is capped with a polished sapphire jewel that spreads the light evenly and shrugs off cleaning solvents. It's the same rugged approach that made these the go-to for plenty of law enforcement agencies and factory sight setups.
The green tritium does the heavy lifting after dark, but the white outline rings around each dot give you solid daylight contrast against the matte black blades. That means one sight picture works whether you're on the range at noon or clearing a dark hallway. The green lamps carry a 12-year warranty, so you're looking at years of dependable glow before they dim.
A quick heads-up on install: getting sights dialed in and seated correctly is best left to a qualified gunsmith unless you've got the right pusher tool and some experience under your belt.
This set is cut for the S&W M&P C.O.R.E., M&P M2.0 Optics Ready, and M&P M2.0 Metal Series pistols. Double-check your slide model before ordering, since Trijicon builds these to specific handgun dovetails. If your M&P falls in that lineup, you're good to go.
Yes. The suppressor height is tall enough to co-witness with a slide-mounted optic such as the Trijicon RMR, so you get a usable sight picture through or beside the window. That's actually one of the main reasons people run these even without a suppressor attached.
No batteries at all. The green tritium glows on its own through a self-luminous reaction, so it's always on with nothing to charge or switch. Trijicon backs the green lamps with a 12-year warranty, and they'll keep glowing for years beyond that at reduced brightness.
Trijicon strongly recommends professional installation from a qualified gunsmith. Suppressor-height sights are a tight dovetail fit and pressing them in without the proper tool can damage the sight or your slide. A good gunsmith can seat and zero them quickly.
| UPC | 719307214989 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SA240-C-601011 |
| Color | Black |
| Model | |
| Product Type | Sight |
You must be logged in to post a review.
Reviews
There are no reviews yet.