Description
When you've got a quality 34mm optic sitting in your safe, you don't want it hanging off a cheap set of rings. The Trijicon 34mm Standard Height Aluminum Rings are machined from aircraft-grade aluminum and wear a hard coat anodized finish, which is the same no-nonsense build quality Trijicon is known for across their optics line. They clamp straight onto a Picatinny rail and are designed to shrug off heavy recoil and hard field use without walking out of zero.
What Sets These Trijicon 34mm Rings Apart
These rings secure to the rail using four T25 torque screws paired with 1/2-inch clamp nuts, so you're getting a serious bite on the rail instead of a couple of thumb screws doing all the work. The standard height spec puts the mount surface at 1.259 inches from the optical axis, with a ring measurement of .590 inches from the base of the scope to the top of the base. The whole set tips the scale at just 4.8 ounces, so you're not adding any meaningful weight to the rifle. They're made in the USA, too.
Fitting Your Scope in the Trijicon Standard Height Rings
This set was built around the Trijicon TARS 3-15×50 with its 34mm tube, but they'll handle any 34mm main tube scope that clears the standard height. One nice thing worth mentioning: these rings don't require lapping out of the box, so you can mount up and get to the range without the extra step. Standard height is a popular pick for low-profile mounting on flat-top rifles when you're not running an oversized objective that needs extra clearance.
If you're serious about your long-range or precision setup and want mounting hardware that matches the optic sitting on top of it, this is a clean, dependable choice from a brand that has earned its reputation the hard way.
Key Specifications
- Manufacturer: Trijicon
- MPN: AC22003
- UPC: 719307450073
- Tube Diameter: 34mm
- Ring Height: Standard
- Mount Surface to Optical Axis: 1.259 in
- Ring Measurement: .590 in
- Material: Aluminum
- Finish: Hard Coat Anodized (Black)
- Mount Type: Picatinny Rail
- Hardware: Four T25 torque screws and 1/2 in clamp nuts
- Weight: 4.8 oz
- Quantity: Pair (set of 2)
- Country of Origin: Made in USA
What’s Included
- Pair of Trijicon 34mm Standard Height Aluminum Scope Rings (AC22003)
- Four T25 torque screws and 1/2 in clamp nuts
Frequently Asked Questions
What size scope tube do these Trijicon rings fit?
These rings are built for riflescopes with a 34mm main tube. They were designed around the Trijicon TARS 3-15×50, but they'll work with any 34mm tube scope that clears the standard height. Just make sure your objective lens isn't too large to clear the rail at this height.
How do these Trijicon 34mm rings attach to my rifle?
They clamp directly to a Picatinny rail using four T25 torque screws and 1/2-inch clamp nuts. That setup gives you a strong, secure grip on the rail that's built to withstand heavy recoil and hard use. You'll want a T25 Torx bit and a torque wrench to seat them to spec.
Do the Trijicon standard height rings need to be lapped before use?
No, these rings do not require lapping. They're machined to tolerance and ready to mount right out of the box, which saves you a step at the bench. Just torque them down properly and you're good to go.
Is this a complete set or a single ring?
This is a complete pair, so you get both the front and rear rings in the set along with the mounting hardware. The whole set weighs in at 4.8 ounces total. One purchase covers everything you need to mount a single 34mm scope.




Reviews
There are no reviews yet.