Description
The Trijicon Compact ACOG 2×20 takes everything the full-size ACOG is famous for and shrinks it down to fit tight-quartered platforms like the UZI, HK MP-5, and today's crop of 9mm pistol-caliber carbines. You get 2x magnification through a 20mm objective, just enough of a bump over irons to pick out and confirm targets faster without giving up the wide, both-eyes-open view you want up close. Best part is there's no battery to babysit. Tritium and fiber optics work together to keep the reticle lit and automatically dial brightness to whatever light you're standing in, from a shaded bay to full sun.
What the Green RTR 9mm PCC Reticle Brings to the Table
This is the newer, updated RTR (Rapid Target Reticle) that Trijicon built around real feedback from folks running PCCs. The center dot grew from 2.0 MOA to 3.25 MOA, which means your eye finds it quicker and gets on target faster. It sits inside a horseshoe shroud that pulls your focus right where it needs to be. The green illumination is a nice touch if you prefer it over red, and the whole thing is calibrated for 9mm with bullet-drop compensation holds out to 300 yards covering common 115-grain supersonic and 147-grain subsonic loads. The 19-inch stadia lines give you a built-in ranging tool once you've got it zeroed.
Built Like an ACOG, Mounted with Q-LOC
The forged aluminum housing is nitrogen-filled and waterproof, and it's the same rugged construction that has made the ACOG the most combat-proven magnified optic out there. It ships with Trijicon's Q-LOC quick-release mount, a Mil-Spec drop-test-rated design that clamps on any Picatinny rail with one hand and no tools. The spring-loaded setup holds retention and returns to zero even if you back the knobs off, so pulling it and putting it back on won't cost you your point of impact.
At right around 8.5 ounces and roughly 5 inches long, this optic disappears on a short carbine. If you're building or running a 9mm PCC and want a magnified sight that shrugs off abuse and never needs charging, this is about as purpose-built as it gets.
Key Specifications
- Manufacturer: Trijicon
- Manufacturer Part Number: TA47-C-400412
- UPC: 719307624719
- Model: Compact ACOG 2×20
- Magnification: 2x
- Objective Lens: 20mm
- Reticle: RTR 9mm PCC (Rapid Target Reticle)
- Reticle Illumination Color: Green
- Center Dot: 3.25 MOA
- Illumination Source: Fiber Optics & Tritium (battery-free)
- BDC Holds: Out to 300 yards
- Eye Relief: 2.1 in.
- Adjustment: 2 clicks per inch @ 100 yards
- Housing Material: Forged Aluminum
- Finish: Matte Black
- Included Mount: Trijicon Q-LOC Technology Mount
What’s Included
- Trijicon Compact ACOG 2×20 optic
- Trijicon Q-LOC Technology quick-release mount
- Adjuster caps with lanyard assembly
- Lens pen / cleaning tool
- ACOG manual
- Warranty card
Frequently Asked Questions
Does the Compact ACOG 2×20 need batteries?
No, and that's one of the big selling points. It runs on tritium and fiber optics, which pull from ambient light during the day and glow on their own in low light. There's nothing to charge, nothing to switch on, and nothing to fail at the worst moment.
What guns is this ACOG best suited for?
It's purpose-built for 9mm platforms with limited rail space, including pistol-caliber carbines, the HK MP-5, UZI, and similar compact firearms. The RTR reticle is calibrated for 9mm ballistics with holds out to 300 yards. If you're running a 9mm PCC for competition, training, or duty, it drops right into that role.
What's different about the green RTR reticle on this newer model?
Trijicon bumped the illuminated center dot from 2.0 MOA up to 3.25 MOA based on shooter feedback, so your eye picks it up faster for quicker target acquisition. The dot sits inside a horseshoe shroud and glows green rather than red. It also carries BDC holds for both 115-grain supersonic and 147-grain subsonic 9mm loads plus stadia lines for ranging.
How does the Q-LOC mount work?
The included Q-LOC mount is a tool-less, one-handed quick-release system that clamps onto any Mil-Spec or NATO Picatinny rail. Its spring-loaded design maintains retention and returns to zero even if the knobs aren't fully tightened. That means you can pull the optic and remount it without losing your point of impact.







Reviews
There are no reviews yet.