Description
Trijicon built the Q-LOC mount for folks who want to run their ACOG or VCOG on a quick-detach setup without giving up the rock-solid lockup those optics are known for. The whole thing operates with one hand and no tools. Spring-loaded knobs let you clamp the optic to any Mil-Spec or NATO Picatinny rail, and the mechanism holds retention even when the knobs aren't fully cranked down. Machined from drop-test rated 6061-T6 aluminum, it keeps weight low at right around 3 ounces while still shrugging off the recoil and abuse a fighting rifle sees.
What the Q-LOC System Does Differently
The real draw here is return-to-zero. Multiple proprietary recoil lugs dig into the rail for total engagement, so you can strip the optic off for storage, transport, or a swap to backup sights and reattach it later without re-confirming your zero at the range. Folks who have run these report the point of impact stays put through repeated mounting and unmounting, and that the clamp locks up tight and feels secure under hard shooting.
Fit, Height, and Setup on the Trijicon ACOG & VCOG Mount
This is the standard (non-cantilever) version, with an optical axis sitting 1.535 inches above the top of the rail. You can clamp it down using spring tension alone at 12 to 16 inch-pounds, or snug it further to 30 to 38 inch-pounds if you want it buttoned up tight. The precision-cut dimensions mean it plays nice with MIL-STD 1913 Picatinny, NATO, and even slightly beat-up rails, and the compact circular profile cuts down on snag points when you're moving through gear or brush.
Coming from the thumbscrew mount that ships with many ACOGs and VCOGs, this is a noticeable step up in speed and convenience. It's made in the USA and wears a matte black anodized finish that matches the no-nonsense look of a Trijicon combat optic.
Key Specifications
- Manufacturer: Trijicon
- Manufacturer Part Number: AC12042
- UPC: 719307616516
- Model: Q-LOC ACOG/VCOG Mount
- Fits: Trijicon ACOG and VCOG riflescopes
- Configuration: Standard (non-cantilever)
- Material: 6061-T6 aluminum, Mil-Spec drop-test rated
- Finish: Matte black anodized
- Rail Compatibility: MIL-STD 1913 Picatinny / NATO
- Height Above Rail: 1.535 in (optical axis)
- Mounting System: One-handed, tool-less Q-LOC quick release
- Torque (spring tension only): 12 to 16 in-lbs
- Torque (can be tightened to): 30 to 38 in-lbs
- Weight: Approx. 3 oz
- Country of Origin: Made in the USA
What’s Included
- 1 ACOG & VCOG Q-LOC mount
- 2 mounting screws
- 1 hex key
Frequently Asked Questions
Does the Trijicon Q-LOC mount really return to zero after you remove the optic?
Yes, that's the main point of the design. Multiple recoil lugs grab the rail for full engagement, and the spring-loaded clamp lets you detach and reattach your ACOG or VCOG without re-confirming zero. Users who swap their optics on and off regularly report the point of impact holds steady through repeated mounting.
Is this the standard mount or the cantilever version?
This is the standard AC12042 mount with the optical axis sitting 1.535 inches above the rail. If you specifically need the optic pushed forward on the rail for eye relief or a particular setup, Trijicon makes a separate cantilever version (AC12043). For most ACOG and VCOG builds, the standard mount is what you want.
What rails is the Q-LOC mount compatible with?
It fits any Mil-Spec or NATO Picatinny rail thanks to its precision-cut dimensions. The tolerances are tight enough that it also clamps securely on non-mil-spec and even slightly damaged rails. You clamp it down one-handed with no tools required.
Do I need any tools to install this mount?
The Q-LOC clamp itself is completely tool-less and works with one hand using the spring-loaded knobs. A hex key comes in the box for attaching the mount to your optic with the two included screws. Once that's set, mounting and dismounting from the rail takes no tools at all.





Reviews
There are no reviews yet.