0
0

TriggerTech Rem 700 Primary Flat Single-Stage Trigger, Black

UPC: 885768000178

$184.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you have been fighting a mushy factory Remington 700 trigger, this is the fix a lot of folks land on. The TriggerTech Rem 700 Primary is a drop-in replacement for right-handed 700 actions, and it swaps out that vague factory feel for a genuinely crisp, zero-creep break with a flat, PVD black lever. No creep before the wall, a short trip past it, and sub .015 inch overtravel means the sear releases right when you expect it to. That kind of predictability is what tightens groups over a long day at the range or on a hunt.

What Sets the Rem 700 Primary Apart

The magic here is TriggerTech's Frictionless Release Technology. Instead of relying on polished, coated, or lubricated sear surfaces like most triggers, it uses a free-floating roller between the sear and the trigger. The result is a break that stays consistent shot after shot, and it holds up in dirt, cold, and wet conditions that gum up traditional designs. Because the break is so clean, most people report the pull feeling around half a pound lighter than a friction-based trigger set to the same measured weight.

Dialing In Your Primary Trigger

Pull weight adjusts from 1.5 to 4.0 pounds in roughly one-ounce increments using the CLKR set screw, which is externally accessible so you are not tearing anything down to fine-tune it. The housing is 7075 aluminum, the guts are hardened 440C stainless steel for corrosion resistance and a long service life, and it ships with a removable safety. Worth noting: firing pin spring weight affects actual pull, so an overweight spring can push readings above the listed range.

Fit and Installation

Installation is about as painless as trigger work gets. The 700 trigger group is a self-contained unit, so for anyone with basic shop skills it is essentially plug and play after a proper function check, though having a gunsmith confirm everything is safe is never a bad call. It drops into factory 700 actions and a wide range of clones and 700-footprint rifles like Bergara, and it is backed by TriggerTech's product lifetime warranty.

Key Specifications

  • Manufacturer: TriggerTech
  • Manufacturer Part Number: R70-SBB-14-TBF
  • UPC: 885768000178
  • Model: Remington 700
  • Trigger Action: Single-Stage
  • Lever Type: Flat
  • Pull Weight Range: 1.5 – 4.0 lbs, adjustable in 1 oz increments
  • Adjustment: CLKR externally accessible set screw
  • Overtravel: Sub .015 inch
  • Housing: 7075 Aluminum (anodized)
  • Key Components: 440C Stainless Steel
  • Finish: PVD Black
  • Hand: Right
  • Safety: With (removable)
  • Warranty: Product lifetime

What’s Included

  • TriggerTech Rem 700 Primary flat single-stage trigger
  • Instruction manual

Frequently Asked Questions

Will the Rem 700 Primary fit my rifle?

It is designed as a direct drop-in for right-handed Remington 700 factory actions and works with a wide range of 700-footprint rifles and clones, including popular builds like the Bergara B14 and HMR. If your action uses the standard Remington 700 trigger footprint, this is the right unit. Double check that you have a right-handed action, since this model is built for right-hand use.

How hard is it to install the Rem 700 Primary trigger?

The Remington 700 trigger group is a self-contained unit, so the swap is close to plug and play for anyone with basic shop skills and takes just a few minutes. It comes with instructions, and after installing you should always run a proper function and safety check. If you are not comfortable working on your rifle, having a gunsmith do the install is a smart move.

How does the pull weight adjustment work?

The Primary uses TriggerTech's CLKR system, which adjusts pull weight from 1.5 to 4.0 pounds in roughly one-ounce clicks. The set screw is externally accessible, so you can fine-tune the weight without disassembling the trigger. Keep in mind your firing pin spring weight can influence the actual measured pull, so an overweight spring may read higher than the listed range.

What makes TriggerTech's Frictionless Release different from other triggers?

Instead of relying on polished, coated, or lubricated sear surfaces, it uses a free-floating roller between the sear and trigger to eliminate creep and friction. That gives you a genuinely clean, zero-creep break that stays consistent over thousands of rounds and performs well in harsh conditions. Because the break is so crisp, many people find the pull feels about half a pound lighter than a friction trigger set to the same weight.

Additional information

UPC

885768000178

Manufacturer

Manufacturer Part Number

R70-SBB-14-TBF

Color

Black

Model

Product Type

Trigger

Shipping Weight

0.325

Style

Adjustable

Reviews

There are no reviews yet.

Be the first to review “TriggerTech Rem 700 Primary Flat Single-Stage Trigger, Black”