$334.99
17 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The TriggerTech Diamond is the top of the food chain when it comes to Remington 700 clone action triggers. It came out of a partnership between TriggerTech and the K&M Shooting Team along with several of the leading R700 clone action builders, and the goal was simple: build the most consistent, crisp-breaking single-stage trigger a competitive shooter could ask for. The result is a drop-in unit with a traditional curved lever, configured here for right-hand use, that will genuinely change how you think about trigger feel.
The magic is in TriggerTech's Frictionless Release Technology. Instead of relying on polishing, coating, or lubricating the engagement surfaces like a conventional sear does, the Diamond uses a rolling element between the sear and the trigger. That means a true zero-creep break, sub .010 inch of overtravel, and a pull that stays the same from your first shot to well past the thousandth. Once you feel it, you start noticing the creep in every other trigger you own. A lot of folks also report the pull feeling noticeably lighter than the number on the gauge, thanks to how clean that break is.
This is where the CLKR Variable Rate Adjustment Technology earns its keep. You can tune the pull weight anywhere from under 4 oz up to 32 oz using an externally accessible set screw, so there's no pulling the barreled action out of the stock to make a change. The lower range moves in roughly 0.2 oz clicks from under 4 oz to about 9 oz, then shifts to roughly 1 oz clicks up to 32 oz. That gives you fine control down low where precision shooters live, and quicker adjustments up top.
Inside the Diamond you'll find hardened 440C stainless steel components wrapped in a 7075-T6 aluminum housing, so corrosion resistance and long service life are baked in. Five of the critical parts are matched as a set to keep that zero-creep break and reliability consistent even in rough conditions. One thing worth knowing: the Diamond is made for Rem 700 clone actions only and ships without a bolt release, so make sure your action fits the bill before ordering.
No. The Diamond is built specifically for Rem 700 clone actions and ships without a bolt release. TriggerTech doesn't consider it compatible with factory Rem 700s because of the wide variance in factory action timing, so check that your action is a clone before ordering.
The Diamond adjusts from under 4 oz all the way up to 32 oz using the CLKR system. The low end moves in roughly 0.2 oz clicks up to about 9 oz, then shifts to about 1 oz clicks the rest of the way. Keep in mind pull weight is affected by your firing pin spring, so an overweight spring can push the numbers above the listed range.
Nope. That's one of the best parts of the Diamond. The adjustment set screw is externally accessible, so you can fine-tune your pull weight without pulling the action out of the stock.
The Diamond uses TriggerTech's Frictionless Release Technology, which places a rolling element between the sear surfaces instead of relying on sliding friction. That gives you a true zero-creep break with sub .010 inch overtravel. Many shooters say the pull feels lighter than the gauge reads because the break is so clean.
| UPC | 885768000703 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | R70SRB02TNC |
| Color | Black |
| Length | 5.4500 |
| Model | |
| Product Type | Trigger |
| Safety | Top |
| Shipping Weight | 0.325 |
| Style | Single-Stage |
You must be logged in to post a review.
Reviews
There are no reviews yet.