$149.99
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The TriggerTech AR9 Duty Flat is a single-stage drop-in trigger built specifically for the 9mm AR platform, where blowback actions run harder and hammer strikes matter. It carries a fixed 3.5 lb pull weight and TriggerTech's Zero Creep break, meaning there's no mushy takeup before the shot goes. The flat trigger shoe gives you a consistent finger position and a bit of leverage that a lot of folks feel translates into a slightly lighter perceived pull than the number on the scale suggests.
The Duty Line grew out of direct feedback from active military and law enforcement operators who ran TriggerTech's competition triggers and wanted the same reliability with a different feel. To get there, TriggerTech more than doubled the pull weight and length of the first stage and added a more forceful reset. The result is a trigger that gives you extra tactile confirmation on every shot, which is exactly what you want when the pressure is on and you can't afford a light strike.
This one leans on TriggerTech's frictionless release, using a free-floating roller between the sear and trigger instead of two sliding surfaces. That's the reason for the clean break and the trigger's reputation for holding up over a long service life. The key internals are 440C stainless steel with a PVD black finish, all housed in an EZAC diecast housing that keeps everything drop-in ready. You're looking at zero creep, roughly 0.060" of overtravel, and a 0.070" reset with a heavier, more deliberate reset force than the competition line.
It fits standard mil-spec AR-9 lowers and uses the standard 0.154" trigger pins, though the pins themselves aren't included in the box. Installation is straightforward for anyone comfortable working inside a lower receiver, and TriggerTech backs the unit with a lifetime warranty. For a PCC build that sees serious range time, competition, or hard use, this is a dependable upgrade over a stock trigger.
No, the pins are not included in the box. It uses standard mil-spec 0.154" trigger pins, which you likely already have from your existing trigger or can pick up separately. A lot of builders grab an anti-walk pin set while they've got the lower open, since it adds a little extra security.
The Duty Line was shaped by feedback from military and law enforcement operators who wanted a more tactile feel than the competition triggers. TriggerTech more than doubled the length and weight of the first stage and built in a heavier, more forceful reset. You still get the same Zero Creep break and stainless internals, just with a firmer, more deliberate feel that gives more confirmation on every shot.
It's a drop-in unit, so installation is straightforward for anyone comfortable working inside a lower receiver. You remove your old trigger and hammer, drop this assembly in, and secure it with your 0.154" pins. If you're not experienced with detail-stripping a lower, TriggerTech recommends having a qualified gunsmith handle it and run the safety checks.
Not really. Thanks to the frictionless roller design and zero creep, many people report the pull feeling lighter than the measured 3.5 lb weight, often around half a pound less than a comparable friction-based trigger. Combined with the flat shoe, it gives you a clean, predictable break that works well for both fast strings and precise shots.
| UPC | 885768003605 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AH9SDB33NNF |
| Color | Black |
| Model | |
| Product Type | Trigger |
| Style | Flat |
You must be logged in to post a review.
Reviews
There are no reviews yet.