0
0

TriggerTech AR-10 Duty Single-Stage Trigger 3.5 lb Curved Black

UPC: 885768003551

$149.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

TriggerTech built the Duty line for people who want a serious upgrade over a mil-spec trigger without babying it. This is the curved, single-stage version set at a fixed 3.5 lb pull, and it's aimed squarely at AR-10 and .308/LR-308 pattern rifles. Where a lot of aftermarket triggers chase the lightest possible break, the Duty leans into a slightly heavier take-up and a more forceful reset, giving you a positive, tactile feel that shines when you're moving fast or wearing gloves.

What Sets the AR-10 Duty Trigger Apart

The heart of this trigger is TriggerTech's Frictionless Release Technology, which uses a rolling element instead of two surfaces sliding against each other. That's a big deal because there's no coating to wear off or polish to break in. Paired with hardened stainless internals and Zero Creep Technology, the break stays clean and consistent shot after shot, and it holds up after thousands of rounds. TriggerTech describes the break as glass-rod crisp, and that's a fair way to put it once you feel the wall.

Dialing In Feel With the Curved Duty Shoe

This one ships with the traditional curved trigger shoe, which sits close to mil-spec width but feels a touch narrower thanks to the ribbed, radiused face. If you grew up on standard AR triggers, the curve will feel familiar right out of the box while still giving you the refined break. The single-stage design is straightforward: one smooth pull, one clean break, short overtravel, and a quick reset that snaps back with authority.

Fitment and Setup Notes

The Duty comes as a self-contained cartridge-style drop-in unit, so installation is quick with your existing trigger and hammer pins, and it uses set screws to lock things down snug. It fits AR-10 and .308 pattern lowers, though pocket geometry and bolt carrier specs can vary between DPMS, M5, and Armalite platforms, so it's worth confirming your lower before you order. For folks who want dead-nuts reliability with a real upgrade in feel, this is one of the easier wins you can add to a .308 build.

Key Specifications

  • Manufacturer: TriggerTech
  • Model: Duty
  • Manufacturer Part Number: AHT-SDB-33-NNC
  • UPC: 885768003551
  • Fits: AR-10 / .308 / LR-308
  • Trigger Type: Single-Stage
  • Pull Weight: 3.5 lb (fixed)
  • Shoe Style: Traditional Curved
  • Color / Finish: Black
  • Internals: Hardened Stainless Steel
  • Key Technology: Frictionless Release + Zero Creep Technology
  • Design Type: Drop-in Cartridge Unit
  • Shipping Weight: 0.395 lb

What’s Included

  • TriggerTech AR-10 Duty single-stage trigger cartridge
  • Trigger set screws / installation hardware
  • Installation instructions

Frequently Asked Questions

Is the AR-10 Duty trigger a true drop-in unit?

Yes, it comes as a self-contained cartridge-style drop-in that installs with your rifle's existing trigger and hammer pins. It also uses set screws to snug it down in the lower, which keeps everything tight without needing dedicated anti-walk pins. Most people find the install quick, but always test for proper fit and function on an unloaded rifle before shooting.

What's the difference between the Duty and TriggerTech's lighter models?

The Duty was developed with feedback from military and law enforcement operators, so it's tuned for a more deliberate feel than the lighter Performance or Diamond lines. It runs a heavier take-up and a more forceful, tactile reset that's easy to feel under stress or with gloves on. If you want a rugged, no-adjustments trigger that still breaks clean, the Duty is the pick.

Will this fit my .308 or LR-308 lower?

It's designed for AR-10 and .308 pattern rifles and works in a wide range of lowers, but pocket geometry and bolt carrier specs can differ between DPMS, M5, and Armalite platforms. The vast majority of in-spec receivers accept it without issue, though a few oddball lowers may need a check first. When in doubt, confirm your platform's compatibility before ordering.

Does the 3.5 lb pull weight adjust?

No, this is a fixed 3.5 lb single-stage trigger, so there's nothing to dial in or tune. That fixed setup is part of why it's so reliable and consistent right out of the box. If you want an adjustable pull weight, TriggerTech's Adaptable line covers that instead.

Additional information

UPC

885768003551

Manufacturer

Manufacturer Part Number

AHTSDB33NNC

Color

Black

Model

Product Type

Trigger

Shipping Weight

0.395

Style

Curved

Reviews

There are no reviews yet.

Be the first to review “TriggerTech AR-10 Duty Single-Stage Trigger 3.5 lb Curved Black”