Description
The TriggerTech Primary is one of the easiest ways to make a good Remington 700 shoot like a much more expensive rifle. It's a drop-in single-stage trigger with a traditional curved lever, built for right-handed Rem 700 and 700-pattern actions without a bolt release. The whole point here is a cleaner break, and TriggerTech delivers it with their Frictionless Release Technology. Instead of relying on polished, coated, or lubed engagement surfaces like a conventional trigger, it uses a free-floating element that gives you a true zero-creep break and keeps that feel consistent shot after shot, even after thousands of rounds.
What Sets the Primary Trigger Apart
Overtravel is held under 0.015 inches, so the moment the shot breaks the movement stops. That crispness has a side benefit worth knowing: because the break is so clean, most people report the pull feeling roughly half a pound lighter than a friction-based trigger set to the same measured weight. Translation is a trigger that feels lighter and sharper than the number on the gauge suggests, which pays off when you're trying to send a precise shot at distance.
Dialing In the TriggerTech Primary
The pull weight adjusts anywhere from 1.5 to 4 pounds in 1 oz increments using TriggerTech's CLKR system. The set screw is externally accessible, so you can fine-tune it without tearing the rifle down. Worth noting that pull weight is affected by your firing pin spring, and a heavier-than-spec spring can push the range above what's advertised. Installation is genuinely simple, and it drops right in where your factory trigger sits.
Built to Take a Beating
Durability is baked into the design. The housing is 7075 aluminum and the internal components are hardened 440C stainless steel, so corrosion resistance and long service life come standard. This particular version wears a natural stainless finish with the curved lever. It's a favorite for precision target work, competition, long-range hunting, and varmint rigs, and it handles rough weather without complaint. If you've never felt a TriggerTech, fair warning that it tends to ruin you on every other trigger you own.
Key Specifications
- Manufacturer: TriggerTech
- Model: Rem 700 Primary
- Manufacturer Part Number: R70-SBS-14-TNC
- UPC: 885768000024
- Fits: Remington 700 and 700-pattern actions
- Orientation: Right-handed
- Trigger Type: Single-stage, traditional curved lever
- Pull Weight Range: 1.5 to 4 lb, adjustable in 1 oz increments
- Adjustment: External set screw (CLKR Technology)
- Overtravel: Sub 0.015 inches
- Release Technology: Frictionless Release Technology, zero-creep break
- Housing Material: 7075 aluminum
- Internal Components: 440C stainless steel
- Finish: Natural stainless
- Bolt Release: None
What’s Included
- TriggerTech Rem 700 Primary single-stage trigger
- Installation manual
Frequently Asked Questions
Will the TriggerTech Primary fit my Remington 700?
It's designed as a drop-in replacement for right-handed Remington 700 and 700-pattern (clone) actions. It fits a wide range of 700 builds, including popular platforms like the Bergara B14 and similar compatible rifles. Keep in mind this version does not include a bolt release, so it's intended for actions that don't require one.
How do I adjust the pull weight on the Primary trigger?
The pull weight adjusts from 1.5 to 4 pounds in 1 oz increments using an externally accessible set screw, so you don't need to remove the trigger from the rifle to tune it. TriggerTech calls this their CLKR system. One thing to remember is that a heavier-than-spec firing pin spring can push the actual pull weight above the advertised range.
Is the TriggerTech Primary hard to install?
Not at all. It's a true drop-in trigger, and most people have it swapped in and adjusted in just a few minutes using the included instructions. Basic hand tools are all you need to get it done at the bench.
What's the difference between the Primary and the Special or Diamond models?
The Primary is TriggerTech's all-around workhorse and delivers the same Frictionless Release zero-creep break as the higher tiers. The Special steps up refinement and lever options, while the Diamond is the top-tier competition trigger with a lighter, matched-set adjustment range. For most hunters and precision shooters, the Primary hits the sweet spot of performance and value.





Reviews
There are no reviews yet.