Description
The factory trigger is usually the first thing that holds an AR-15 back, and the TriggerTech Adaptable is one of the easiest fixes for it. This is a self-contained, drop-in primary trigger with a curved lever and a short two-stage action that's designed to feel like a good 1911 pull. You get a light take-up first stage, a wall you can find every single time, and a true zero-creep break with very little movement after the shot. What sets it apart from most drop-ins is the Frictionless Release Technology, which uses a rolling engagement instead of the usual sliding sear surfaces. Because it isn't relying on polishing, coating, or lube to stay smooth, the pull stays consistent shot after shot and holds up well after thousands of rounds.
Dialing In the Adaptable's Pull Weight
The "Adaptable" name comes from the CLKR adjustment system. You can tune the total pull weight anywhere from 2.5 to 5.0 pounds in 2-ounce clicks using a set screw, and you can do it with the trigger installed in the lower. That flexibility is the whole point here. Drop it to a 2.5-pound match pull for tight groups on the bench, or bump it back up toward 5 pounds for a general-purpose or duty-style feel, and switch between them in seconds. A nice detail: changing the pull weight doesn't change hammer strike force, so you get full, dependable primer ignition at every setting. One thing worth knowing is that because there's zero creep, most people find the pull feels roughly half a pound lighter than a friction-based trigger measuring the same weight.
Built to Take a Beating
The housing is 7075-T6 aluminum with a hard anodized finish, and the key internals are hardened 440C stainless steel for corrosion resistance and long service life. The external stainless components wear a PVD black coating that keeps things looking clean. It fits AR-15 rifles and pistols and compatible platforms running the standard mil-spec 0.154-inch small pin, and the sub 0.030-inch tactical reset gives you a quick, tactile signal for fast follow-ups. For a self-contained unit like this, installation is straightforward if you're comfortable working in an AR lower.
Key Specifications
- Manufacturer: TriggerTech
- Model: Adaptable AR Primary
- Manufacturer Part Number: AR0-TBB-25-NNC
- UPC: 885768000383
- Platform: AR-15 rifles, pistols, and compatible platforms
- Action Type: Short two-stage
- Lever Shape: Curved
- Total Pull Weight: 2.5 to 5.0 lbs, adjustable in 2 oz increments
- First Stage Weight: 0.75 lbs
- Second Stage Weight: 1.75 to 4.25 lbs
- Adjustment System: CLKR Technology, adjustable with trigger installed
- Release Technology: Frictionless Release Technology (zero creep)
- Tactical Reset: Sub 0.030 inch
- Pin Size: Mil-spec 0.154 inch
- Housing Material: 7075-T6 aluminum, hard anodized
- Internal Components: Hardened 440C stainless steel
- Finish: PVD Black
- Hand Orientation: Right Hand
What’s Included
- TriggerTech Adaptable AR two-stage drop-in trigger (curved lever)
- Installation tools
- Instruction book
- TriggerTech patch
Frequently Asked Questions
Can I adjust the pull weight on the Adaptable trigger without removing it?
Yes. The CLKR system lets you adjust the total pull weight from 2.5 to 5.0 pounds in 2-ounce increments using a set screw while the trigger is installed in the lower. You can move from a light match pull to a heavier general-purpose setting in seconds. Changing the weight does not affect hammer strike force, so ignition stays reliable at every setting.
Will the TriggerTech Adaptable fit my AR-15?
It's built for AR-15 rifles and pistols and compatible platforms that use the standard mil-spec 0.154-inch small pin diameter. It's a self-contained, drop-in unit, so there are no loose springs and pins to juggle during installation. As long as your lower runs the standard small-pin spec, you should be good to go.
How is Frictionless Release Technology different from a normal trigger?
Instead of a sliding sear surface, it uses a rolling engagement that produces a true zero-creep break. Because it doesn't depend on polishing, coating, or lubrication to stay smooth, the pull stays consistent shot to shot and after thousands of rounds. Many people find the pull feels about half a pound lighter than a friction-based trigger at the same measured weight.
What's the difference between the curved and flat lever versions?
This is the curved lever model, which sits closer to the traditional factory AR trigger feel that a lot of people are used to. The flat version gives a more positive, consistent feel under a high grip and is popular with competition shooters. Both share the same internals, adjustment range, and two-stage action, so it really comes down to what your finger prefers.



Reviews
There are no reviews yet.