Description
If you've spent a day at the range or in the stand with a .50 caliber muzzleloader, you know the recoil can wear you down before the hunt is over. The Traditions Pro Series Muzzle Brake tackles that head-on. It threads onto the 3/4-24 barrels found on NitroFire and Pursuit XT Pro Series rifles, and it's built to take the sting out of every shot while keeping your groups tight. The side ports are positioned to kick smoke and gas out to the sides fast, which means you can watch your impact through the scope instead of losing your sight picture in a plume.
What the Pro Series Muzzle Brake Does at the Range
Recoil reduction is the headline here, and folks who've run it on their Pro Series muzzleloaders report the felt kick dropping by close to half. That kind of difference adds up over a long practice session or a season of shooting. Beyond the comfort, the brake helps balance the rifle up front, giving the gun a steadier, more planted feel when you settle in on a target.
Installing the Traditions Pro Series Brake
This is a self-timing design, so you can align and install it yourself without a trip to a gunsmith or any specialized timing shims. It meets SAAMI thread specifications with the 3/4-24 pattern, so the fit is secure and repeatable. The matte-black Nitride finish handles moisture and rough weather without rusting up on you, which matters when your rifle spends time in a wet blind or a snowy woodline.
One detail that sets this apart from a lot of aftermarket brakes: Traditions includes a brass ramrod extension. That means you can load your muzzleloader without pulling the brake off first, which keeps things simple in the field. Keep in mind this brake is made for threaded-barrel Pro Series models only, so it won't work on standard NitroFire or Pursuit rifles that don't have the threading from the factory.
Key Specifications
- Manufacturer: Traditions Performance Firearms
- Manufacturer Part Number: A1660
- UPC: 040589031040
- Caliber: .50 Caliber
- Thread Pattern: 3/4-24 (SAAMI spec)
- Finish: Matte Black Nitride
- Timing: Self-timing, no special tools required
- Compatibility: NitroFire, NitroBolt, and Pursuit XT Pro Series (threaded barrels)
- Length: 4.75 in
- Product Type: Muzzle Brake
What’s Included
- Traditions Pro Series Muzzle Brake
- Brass ramrod extension
Frequently Asked Questions
Will the Traditions Pro Series Muzzle Brake fit my rifle?
This brake is made specifically for threaded-barrel Pro Series models, including the NitroFire, NitroBolt, and Pursuit XT Pro Series. It uses a 3/4-24 thread pattern that meets SAAMI specifications. It will not fit standard NitroFire or Pursuit rifles that don't come with a threaded barrel from the factory.
Do I need a gunsmith to install this muzzle brake?
No. The Pro Series Muzzle Brake is self-timing, so you can align and thread it on yourself without any specialized tools or timing shims. Most folks get it dialed in and ready to shoot in just a few minutes.
How much recoil does this brake actually reduce?
Users running it on their .50 caliber Pro Series muzzleloaders commonly report felt recoil dropping by close to half. The side ports also divert smoke and gas quickly, which helps you stay on target for a follow-up shot. The added weight up front helps balance the rifle too.
Can I still load my muzzleloader with the brake installed?
Yes. Traditions includes a brass ramrod extension with the brake so you can load from the muzzle without removing it. That keeps your setup simple and saves you time in the field.



Reviews
There are no reviews yet.