Description
When your flintlock starts getting stingy with sparks, the frizzen is usually the first suspect. Flint chews on that steel face every time you cock the hammer, and eventually it wears smooth or gouges up enough to lose its bite. The Traditions A1722 Deluxe Flintlock Frizzen is the factory answer to that, built with a bigger, hardened striking surface that bites the flint edge harder and kicks a stronger, more consistent spark into the pan.
What the A1722 Deluxe Frizzen Fits
This one replaces the frizzen on the deluxe-style lock used in the PA Pellet and most other Traditions flintlock rifles and kits. Worth knowing before you order: the deluxe frizzen has a smooth back, while the older-style A1721 has engraving on the back. If you are staring at your lock trying to tell them apart, that smooth backside is the tell. It comes unfinished so it matches the raw steel look of the deluxe lock.
Getting the Deluxe Flintlock Frizzen Dialed In
A lot of folks drop this in and are back to sparking in minutes, especially on a Traditions Pennsylvania Rifle or a matching deluxe lock. On other guns, or an older CVA lock, you may need to touch up the pivot tab with a file so it swings free and clean. That is normal frizzen fitting work, not a defect, and it pays off with smooth, reliable travel. Take your time, check that the flint is striking high on the face at a good angle, and you will be rewarded with a fat spray of sparks.
Why Keep a Spare Frizzen Around
Frizzens are a wear part, plain and simple. Keeping one of these in your possibles bag is cheap insurance for a hunt or a range day, because a dead frizzen means a dead gun. Whether you are freshening up a tired lock or just want a backup in the bag, this is the part that keeps your Traditions flintlock lighting off when it counts.
Key Specifications
- Manufacturer Part Number: A1722
- Brand: Traditions
- UPC: 040589004242
- Type: Replacement Flintlock Frizzen
- Lock Style: Deluxe Lock
- Striking Face: Larger, hardened face
- Finish: Unfinished
- Material: Steel
- Firearm Type: Rifle / Muzzleloader
- Fitment: PA Pellet and most Traditions flintlock models
- Identifying Feature: Smooth back (no engraving)
What’s Included
- Traditions A1722 Deluxe Flintlock Frizzen (1)
Frequently Asked Questions
How do I know if I need the deluxe A1722 frizzen or the standard A1721?
The quickest way to tell is by looking at the back of your current frizzen. The deluxe A1722 has a smooth back, while the older standard A1721 has engraving on the back. The deluxe version is used on the PA Pellet and most current Traditions flintlock models.
Will the A1722 deluxe frizzen drop right in without fitting?
On a matching Traditions deluxe lock, like a Pennsylvania Rifle, it often installs quickly with little to no fuss. On some other guns or older locks, you may need to file the pivot tab a bit so it swings freely. That is routine frizzen fitting and only takes a little patience with a file.
Why does a hardened face matter on a flintlock frizzen?
The flint scrapes off tiny bits of hot steel every strike, and that shower of sparks is what ignites your pan powder. A harder, larger face resists wear and gouging longer while throwing a stronger, more consistent spark. That translates to more reliable ignition and fewer frustrating misfires.
Should I keep a spare frizzen in my kit?
It is a smart move. Frizzens are a wear item, and a worn or damaged one can leave you with a gun that will not fire. Tossing a spare A1722 in your possibles bag is cheap insurance for a hunt or long range session.





Reviews
There are no reviews yet.