0
0

Traditions NitroFire Pro .50 Cal Muzzleloader 26in Veil Alpine

UPC: 040589030869

$700.99

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Muzzleloading used to mean fumbling with loose powder, worrying about a damp charge, and scrubbing a breech plug at the end of the day. The Traditions NitroFire Pro does away with all of that. It runs on the Federal Premium FireStick, a sealed, pre-measured powder capsule that drops into the breech while your bullet loads from the muzzle. Every charge is factory-consistent and sealed against moisture, so a rainy morning in the stand is no longer a reason to second-guess your ignition. And since there is no breech plug at all, cleanup after a range session is quicker than just about any traditional inline out there.

What Makes the NitroFire Pro Different

The Pro Series is where Traditions loads up the extras. The Veil Alpine camo synthetic stock has an adjustable cheekpiece you raise or lower with a simple screw, plus length of pull spacers so you can dial the fit for heavy winter layers or a lighter early-season setup. Getting your eye lined up naturally behind a scope matters, and this stock lets you set it once and forget it. The 26 inch chromoly barrel is fluted and tapered to trim weight, finished in tough Tungsten Cerakote, and threaded at the muzzle if you want to add a brake and tame recoil on those heavier loads.

VAPR Twist and the Elite XT Trigger

The 1:24 VAPR twist rate is faster than the old 1:28 standard, which stabilizes a wider range of modern saboted and full-bore bullets and tightens up groups at the distances muzzleloader hunters are stretching to these days. Behind it sits the Elite XT trigger system with a rebounding hammer and cross-block safety, letting you break the action open with the safety still engaged. The receiver comes drilled and tapped, and Traditions includes a one-piece Weaver-style base, so you can mount glass right out of the box. At a shade over seven and a half pounds, it carries well into the backcountry and points quick when a buck steps out with light fading.

Key Specifications

  • Manufacturer Part Number: CR846604534B
  • UPC: 040589030869
  • Caliber: .50 Caliber
  • Action: Break Open, Single Shot
  • Barrel Length: 26 in, Fluted, Tapered and Threaded Chromoly
  • Twist Rate: 1:24 in VAPR Twist
  • Ignition: Federal Premium FireStick (209 Primer)
  • Trigger: Elite XT Trigger System
  • Stock: Veil Alpine Synthetic, Adjustable Cheekpiece and LOP
  • Barrel/Receiver Finish: Tungsten Cerakote
  • Receiver: Drilled and Tapped
  • Sights: None (Scope Base Included)
  • Overall Length: 42 in
  • Weight: Approx. 7.6 lbs
  • Capacity: 1

What’s Included

  • Traditions NitroFire Pro .50 Cal muzzleloader
  • One-piece Weaver-style scope base
  • Length of pull spacers
  • Owner's manual

Frequently Asked Questions

Can I use loose powder or pellets in the Traditions NitroFire Pro?

No, the NitroFire Pro is built specifically around the Federal Premium FireStick system. The breech only accepts the FireStick capsule, which holds a pre-measured charge of clean-burning Hodgdon Triple Eight powder. The bullet still loads from the muzzle like a traditional muzzleloader, but the powder charge always comes from the sealed FireStick.

Does the NitroFire Pro come with sights or a scope?

It ships without sights, but the receiver is drilled and tapped and Traditions includes a one-piece Weaver-style scope base in the box. That means you can bolt on rings and a muzzleloader scope right away. If you prefer open sights, the barrel is set up to accept those as well.

How is the NitroFire Pro different from the standard NitroFire?

The Pro Series adds an adjustable cheekpiece, spacer-adjustable length of pull, and a threaded muzzle so you can run a brake to cut recoil. The standard NitroFire has a fixed stock and no muzzle threading. Both share the same FireStick ignition, Elite XT trigger, and 26 inch chromoly barrel design.

What bullets work best with the 1:24 VAPR twist barrel?

The faster 1:24 twist stabilizes a broader range of projectiles than the old 1:28 standard, including longer, heavier saboted bullets and modern full-bore designs. Most hunters see great results with 250 to 350 grain saboted bullets. It pays to test a few loads at the range since every barrel has its favorites.

Additional information

UPC

040589030869

Manufacturer

Manufacturer Part Number

CR846604534B

Action

ATF Type

RIFLE

Barrel Length

26"

Caliber/Gauge

.50 Caliber

Capacity

1

Color

TUNGSTEN

Length

45.7500

Package Height

3.5

Package Width

8.5

Product Type

Muzzleloader

Shipping Weight

8.9

Sights

No Sights

Sights Type

NONE

Reviews

There are no reviews yet.

Be the first to review “Traditions NitroFire Pro .50 Cal Muzzleloader 26in Veil Alpine”