Description
Getting a patch through a tight .17 or .20 caliber bore takes a rod that's stiff enough to push through but gentle enough to leave your rifling alone. The Tipton Deluxe Carbon Fiber Cleaning Rod threads that needle nicely. Its one-piece carbon fiber shaft won't scratch the bore the way bare stainless steel can, and unlike coated rods, it won't embed abrasive grit that acts like fine sandpaper on every pass. Carbon fiber also has a handy trick: you can flex it hard and it springs right back to straight.
What Sets the Tipton Deluxe Rod Apart
The standout feature is the handle. It rides on two sets of ball bearings, so it stays planted in your palm while the shaft spins freely and follows the rifling on both the push and the pull. There's no drag fighting you and no twisting force working against the crown of your barrel. Owners who've run everything from bargain rods to shop-built setups tend to point to that smooth-spinning handle as the reason they don't go back.
Sizing and Threads on the .17-.20 Cal 36 in Rod
This rod is cut for the small stuff, covering the .17 to .20 caliber range at a 36-inch working length that reaches through most rifle barrels with room to spare. Worth knowing: the smaller-bore Tipton rods like this one use 5-40 accessory threads rather than the 8-32 pattern found on their larger-caliber rods, so pick up jags, brushes, and mops that match. The shank-through design also lets you tap the end to work a stubborn tight patch through when things get gummed up.
Built to Last
Carbon fiber earned Tipton a real reputation here. These rods got called into service cleaning military rifles in rough field conditions, which tells you plenty about the durability. A hang hole on the handle makes it easy to store on a pegboard or in your cleaning kit so it isn't rolling around your bench. For anyone running rimfire varmint rigs or small-caliber precision guns, this is a rod you buy once and keep using.
Key Specifications
- Manufacturer: Tipton
- Manufacturer Part Number: 107486R
- UPC: 661120074861
- Caliber Range: .17 to .20 Caliber
- Working Length: 36 in
- Rod Material: Carbon Fiber
- Construction: One-Piece, Shank-Through
- Thread Pattern: 5-40
- Handle: Ergonomic, Two Sets of Ball Bearings
- Product Type: Cleaning Rod
What’s Included
- Tipton Deluxe 1-Piece Carbon Fiber Cleaning Rod, .17-.20 Cal, 36 in
Frequently Asked Questions
What thread size does the .17-.20 cal Tipton Deluxe rod use?
This small-caliber rod uses 5-40 accessory threads, not the 8-32 pattern found on Tipton's larger-caliber rods. Make sure any jags, brushes, slotted tips, or bore mops you buy are threaded 5-40 so they seat correctly. It's an easy detail to overlook when ordering accessories.
Will the carbon fiber cleaning rod scratch my barrel?
No, and that's the whole point of carbon fiber. Unlike bare stainless steel, it won't gouge the bore, and unlike coated rods, it won't embed abrasive particles that grind against your rifling. Wiping the shaft down between passes keeps things running clean and protects the barrel even further.
Why does the handle on this Tipton Deluxe rod spin?
The handle rides on two sets of ball bearings so it stays fixed in your hand while the shaft rotates freely to follow the rifling. This lets the rod track the twist of the barrel on both the push and the pull with almost no drag. It also keeps twisting force off the crown, which is where a lot of muzzle wear starts.
Is a 36-inch rod too long for shorter barrels?
The 36-inch working length is designed to reach through most full-size rifle barrels with extra room, so you'll have plenty of length for varmint rigs and precision guns. On a shorter barrel it just means more rod sticking out the muzzle end, which isn't a problem during cleaning. If you're only working short barrels, a shorter rod might be handier, but this length covers the widest range.



Reviews
There are no reviews yet.