Timney AR PCC Drop-In Trigger 681 Curved Single Stage 2.5-3 lb

Description

Pistol caliber carbines run a little different from a standard AR, and the blowback action puts real stress on trigger internals. That's exactly what Timney had in mind when they built the 681. This is a complete, self-contained assembly that drops right into your PCC lower and gives you a clean, single-stage pull without the mushy feel of a stock trigger. It ships factory tuned to a pull weight between 2.5 and 3 pounds, so there's nothing to dial in before you head to the range.

What Sets the Timney 681 PCC Trigger Apart

The housing is machined from 6061-T6 aluminum and finished in Timney's signature gold anodizing, with heat-treated steel internals doing the actual work. The big deal here is the hardened steel bridge inside the module, which is there to shield the trigger components from the heavy bolt blowback that PCCs are known for. That's the sort of detail that keeps a trigger feeling consistent shot after shot instead of getting sloppy over a few thousand rounds of 9mm.

Getting the AR PCC Curved Trigger Into Your Build

Installation is about as simple as it gets. The module uses your rifle's original hammer and trigger pins along with the existing safety, so you drop it in, pin it down, snug the set screws, and you're done. No fitting, no filing, no trip to the gunsmith. This one wears the curved trigger shoe, which is the traditional bow shape most folks are used to, while Timney also offers a straight version if that's more your speed. Folks who run these in competition PCC guns tend to praise how crisp the break is and how solid the reset feels.

Timney has been building triggers in the USA since 1946, and every unit is tested and calibrated by hand before it leaves the shop. If you're chasing tighter groups or faster splits on a 9mm, .40, or .45 carbine, the 681 is a straightforward upgrade that punches well above the effort it takes to install.