Description
The EGW HD Picatinny base is built specifically for the Tikka T3x TAC A1, and it gives your long-range setup the elevation headroom it deserves. The 30 MOA of built-in cant tips your optic forward so you keep plenty of usable turret adjustment left when you're reaching way out past a thousand yards. Picatinny cross slots run the full length of the rail, so you've got room to slide your rings exactly where eye relief wants them and still have space for a clip-on or other accessories.
Why the Tikka T3x TAC A1 Rail Earns the HD Name
This is EGW's Heavy Duty line, machined from solid 7075 T6 aircraft-grade aluminum and finished in a matte black Type III hardcoat anodize. After machining, the mounts get tumbled and sandblasted before that durable anodized finish goes on, which is why these rails shrug off hard use season after season. It carries a 3.245 inch center spread, runs about 6.761 inches long, sits .35 inch from the top of the receiver to the top of the rail, and tips the scale right around 2.5 ounces. It's also ambidextrous and plays nice with quick-disconnect ring systems.
Dialing Long Range With the 30 MOA TAC A1 Base
The 30 MOA option is made for the folks pushing real distance and burning through scope travel. That forward cant frees up internal elevation in your optic so you can stay in the sweet spot of your turret instead of maxing out. Pair it with a quality set of Picatinny or Weaver rings and you've got a stable, repeatable platform for a precision rifle that likes to stretch its legs.
One thing worth knowing before you wrench on it: this rail replaces the factory TAC A1 mount, and there's a screw up front hiding under the handguard. You'll need to pull the handguard and back that screw out before the original mount comes off. EGW calls for 20 inch-pounds of torque and a drop of blue thread locker on reassembly. Keep in mind this is a dedicated TAC A1 part and does not fit standard Tikka T3 or T3x receivers.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 80513
- UPC: 841370117291
- Fits: Tikka T3x TAC A1 only
- Elevation / Cant: 30 MOA
- Style: One-Piece Picatinny Rail
- Ring Compatibility: Picatinny or Weaver
- Material: 7075 T6 Aircraft-Grade Aluminum
- Finish: Matte Black Type III Hardcoat Anodize
- Center Spread: 3.245 in
- Overall Length: 6.761 in
- Height (receiver to rail top): 0.35 in
- Weight: 2.5 oz
- Ambidextrous: Yes
- Quick Disconnect Ring Compatible: Yes
- Made In: USA
What’s Included
- EGW HD Tikka T3x TAC A1 Picatinny base (1)
- (5) #6-48 x 1/4 screws
- (2) recoil pins
- T-10 wrench
Frequently Asked Questions
Does this rail fit a standard Tikka T3 or T3x rifle?
No, this base is built specifically for the Tikka T3x TAC A1 and uses that rifle's dedicated mounting setup. Standard T3 and T3x receivers use a different pattern and need a different EGW rail. Always match the rail to your exact Tikka model before ordering.
What does the 30 MOA cant do for me?
The 30 MOA of built-in elevation angles your scope forward so you preserve more of your turret's internal travel for long-range dialing. It's the setup for shooters pushing well past a thousand yards who want to keep plenty of up adjustment in reserve. If you spend most of your time inside 500 yards, a 0 or 20 MOA base makes more sense.
What rings work with this Picatinny base?
This is a Picatinny-style rail, so it accepts any standard Picatinny or Weaver scope rings. The cross slots run the full length, giving you flexibility to position rings for proper eye relief. It's also quick-disconnect ring compatible if you run a QD system.
Is installation straightforward on the TAC A1?
It takes a little more than a bolt-on job. You'll need to remove the handguard and back out a hidden screw at the front before the factory mount comes off. EGW recommends torquing to 20 inch-pounds with a drop of blue thread locker, and the T-10 wrench you need is included in the box.




Reviews
There are no reviews yet.