Description
There's a reason the T1x has become the rimfire that other rimfires get measured against. Tikka took the DNA from its wildly popular T3x centerfire rifles and scaled it into a bolt action .17 HMR that feels like a real rifle, not a plinker. The trigger group is the same unit found in the T3x, a crisp single-stage that adjusts from roughly 2 to 4 pounds, and the action shares the same bedding surfaces and inlay footprint as the T3x. That last part matters more than it sounds, because it opens the door to a huge world of aftermarket chassis and stocks whenever you decide to build on it.
What Makes the T1x MTR Barrel Different
The 20 inch cold hammer forged barrel uses what Tikka calls a crossover profile. It gives you the stiffness and steadiness of a heavy target barrel without dragging the weight up, so the rifle balances well offhand and still settles down nicely on a bipod. The muzzle comes threaded 1/2×28 with a protector installed, so adding a suppressor or other muzzle device is a five minute job. Paired with the zippy .17 HMR cartridge and a 1:9 twist, this setup shines on prairie dogs, ground squirrels, and steel out past distances that make .22 LR shooters jealous.
A Rimfire Built for Real Use
The stainless steel bolt runs smooth and shrugs off weather, and the black synthetic stock is modular, with an interchangeable pistol grip and an asymmetrical grip texture that locks your hand in place. It accepts most T3x stock accessories too, so you can tailor the fit as you go. The flat top receiver has an integral dovetail and is drilled and tapped for a Picatinny rail, giving you flexible options for glass. A detachable 10 round magazine comes standard.
Why the Tikka T1x in .17 HMR Earns Its Keep
At around 5.7 pounds bare, it carries easily on a long walk through the fields but has enough barrel up front to hold steady when a shot presents itself. Finnish craftsmanship, a genuinely good trigger, and accuracy that tends to surprise people the first time out. It's the kind of rifle that gets handed down, not traded in.
Key Specifications
- Manufacturer: Tikka
- Model: T1x MTR
- MPN: JRT1X309
- UPC: 082442898360
- Caliber: .17 HMR
- Action: Bolt Action
- Barrel Length: 20"
- Barrel: Cold Hammer Forged, Crossover Profile
- Muzzle Thread: 1/2×28, Threaded with Protector
- Twist Rate: 1:9"
- Capacity: 10+1
- Trigger: Single-Stage, Adjustable 2-4 lbs
- Stock: Black Modular Synthetic
- Bolt: Stainless Steel
- Sights: None, Dovetail Receiver, Drilled & Tapped for Picatinny
- Weight: Approx. 5.7 lbs
What’s Included
- Tikka T1x MTR rifle
- One 10-round detachable magazine
- Muzzle thread protector
- Owner's manual
Frequently Asked Questions
Does the Tikka T1x MTR come with sights or a scope rail?
No iron sights are included, since this rifle is really meant to wear glass. The flat top receiver has an integral dovetail for rimfire-style rings and is also drilled and tapped, so you can mount a Picatinny rail if you prefer standard rings or a mount for longer range work.
What is the thread pattern on the T1x MTR muzzle?
The 20 inch barrel is threaded 1/2×28 and ships with a thread protector installed. That's the most common rimfire suppressor pattern in the US, so most cans and muzzle devices will spin right on without an adapter.
Can I put a Tikka T3x stock or aftermarket chassis on the T1x?
Yes, and that's one of the T1x's biggest strengths. The action shares the same bedding surfaces and inlay footprint as the centerfire T3x, so a large chunk of the T3x aftermarket including chassis systems and precision stocks will accept it. The factory stock also takes most T3x accessories like interchangeable grip inserts.
Is the trigger on the Tikka T1x adjustable?
It is. The T1x uses the same trigger group found in Tikka's T3x centerfire rifles, and pull weight adjusts from roughly 2 to 4 pounds. It's a crisp, clean-breaking single-stage unit and a big part of why these rifles shoot as well as they do.




Reviews
There are no reviews yet.