0
0

EGW Tikka T1X 1-Piece Picatinny Base 0 MOA – 7075 Aluminum

UPC: 841370111565

$63.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Mounting a scope on your Tikka T1X deserves a base that won't let you down, and this EGW one-piece Picatinny rail delivers exactly that. It's machined from solid 7075 T6 aircraft grade aluminum, then tumbled, sandblasted, and Type III hardcoat anodized in a matte black finish that holds up to real use in the field. The single-piece design keeps everything in perfect alignment, so you don't have to worry about the front and rear mismatch you can run into with two-piece bases or factory dovetail setups.

This is the 0 MOA version, which is the sweet spot for most rimfire work. EGW recommends the 0 MOA rail for shooting inside roughly 150 yards, making it a natural fit for plinking, small game, and general range time with your .22 LR or .17 HMR T1X. If you plan on stretching things out past that, the 20 MOA version is the one to look at, but for the vast majority of T1X owners, this one covers your bases.

Why the EGW T1X Rail Earns Its Keep

The Picatinny cross slots run the full length of the rail and are machined to MIL-STD 1913 specs, giving you plenty of room to position your rings and dial in eye relief. Since it accepts both Picatinny and Weaver rings, you've got your pick of mounting hardware, and if you already run a Pic rail on a centerfire rifle, swapping a scope between platforms becomes a whole lot easier. It sits at roughly 0.35 inches high from the top of the receiver, with a 6.276 inch overall length and a center spread of 2.508 inches.

Fitment and Setup on Your Tikka T1X

This rail is cut specifically for the Tikka T1X and fits all models, including the MTR and UPR. It's the right-hand version. EGW includes the #6-48 x 1/4 inch screws and a T-10 bit in the box, and they recommend torquing the screws to 20 inch pounds with a drop of blue Loctite for a mount that stays put. It's smart to measure your receiver hole spacing against EGW's published dimensions and clean out any factory debris from the threads before you start.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • MPN: 80520
  • UPC: 841370111565
  • Model: T1X
  • Fits: Tikka T1X (all models, including MTR and UPR)
  • Elevation: 0 MOA
  • Rail Type: One-Piece Picatinny (MIL-STD 1913)
  • Material: 7075 T6 Aircraft Grade Aluminum
  • Finish: Matte Black Type III Hardcoat Anodized
  • Color: Black
  • Overall Length: 6.276 in
  • Height: 0.35 in (top of receiver to top of rail)
  • Center Spread: 2.508 in
  • Weight: 2.5 oz
  • Hand: Right Hand
  • Country of Origin: Made in USA

What’s Included

  • EGW Tikka T1X 1-piece Picatinny base (0 MOA)
  • #6-48 x 1/4 inch mounting screws
  • T-10 Torx bit

Frequently Asked Questions

Does the EGW Tikka T1X Picatinny base fit all T1X models?

Yes, this rail is cut specifically for the Tikka T1X and fits all models, including the MTR and UPR. This is the right-hand version. EGW does suggest measuring your receiver hole spacing against their published dimensions just to confirm the fit before installing.

What rings do I need for this base?

Since this is a Picatinny-style base, it accepts any standard Picatinny or Weaver scope rings. The full-length cross slots give you a lot of freedom to position the rings where you need them for proper eye relief. Rings are not included, so you'll want to pick those up separately.

Should I get the 0 MOA or the 20 MOA version?

The 0 MOA base is the right call for most rimfire shooting, generally inside about 150 yards, which covers plinking, small game, and range work. If you plan to stretch your T1X out to longer distances, the 20 MOA version adds built-in elevation to give you more room in your scope's adjustment. For the majority of T1X owners, this 0 MOA rail is the one to grab.

What's the proper way to install this rail?

EGW recommends torquing the mounting screws to 20 inch pounds with a drop of blue Loctite, which is sold separately. Before you start, make sure the rifle is unloaded, degrease the receiver holes and screws, and clear out any factory debris from the threads. The included T-10 bit and screws give you what you need to get it mounted.

Additional information

UPC

841370111565

Manufacturer

Manufacturer Part Number

80520

Color

Black

Length

9.0500

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Tikka T1X 1-Piece Picatinny Base 0 MOA – 7075 Aluminum”