Description
The beauty of the Thompson/Center Encore system has always been how one frame can wear a dozen different hats, and this 20 gauge turkey barrel is one of the best reasons to own one. It's a 24-inch matte blued barrel with a 3-inch chamber, built specifically to throw tight, dense patterns at gobblers that hang up out of range. Pop off two forend screws, tap out the hinge pin, and you've swapped your rifle or muzzleloader barrel for a dedicated turkey gun without losing your zero on the other setup.
What the Encore 20GA Turkey Barrel Brings to the Woods
Right out of the box it's set up to hunt. The barrel ships with an extra full turkey choke that squeezes patterns down for those longer shots, and the fiber optic adjustable sights pull your eye right onto the bead in low spring light. The 20 gauge platform is a favorite for turkey work because it's light, points fast, and hits plenty hard with modern turkey loads, all without beating you up like a heavier 12.
Setting Up Your 6060R Barrel
The top of the barrel is drilled and tapped for a scope base, so mounting an optic or a compact red dot is a simple job. A lot of turkey hunters run a low-power scope or dot on these to take the guesswork out of aiming at a tom's head. The threads follow the standard Browning Invector pattern, which means you've got easy access to aftermarket choke tubes if you want to fine-tune your pattern with a specific load.
This barrel fits Encore and Encore ProHunter frames. It will not work on Contender or G2 Contender frames, so make sure you're building on the right receiver before you order. For anyone already running the Encore system, adding this barrel is one of the most cost-effective ways to get a purpose-built turkey gun that shares a frame with the rest of your kit.
Key Specifications
- Manufacturer: Thompson/Center Arms
- Model: Encore
- Manufacturer Part Number: 6060R
- UPC: 810180300483
- Gauge: 20 Gauge
- Barrel Length: 24 inches
- Chamber: 3 inch
- Barrel Finish: Matte Blued
- Barrel Material: Steel
- Choke Included: Extra Full Turkey
- Choke Thread Pattern: Browning Invector
- Sights: Fiber Optic Adjustable
- Optics Ready: Drilled and Tapped for Scope Base
- Fits: Encore and Encore ProHunter Frames
- Product Type: Replacement Shotgun Barrel
What’s Included
- Thompson/Center Encore 20 gauge 24-inch barrel
- Extra full turkey choke tube
- Fiber optic adjustable sights (installed)
Frequently Asked Questions
What frames does the Encore 20 gauge barrel fit?
This 6060R barrel is built for Thompson/Center Encore and Encore ProHunter frames. It is not compatible with Contender or G2 Contender frames, since those use a smaller, different receiver. If you're running the full-size Encore platform, it drops right on.
How do I swap this barrel onto my Encore?
It's a quick job with no gunsmithing needed. Remove the two forend screws, tap out the hinge pin, and lift off your current barrel, then reverse the steps with the new one. The whole swap takes just a couple of minutes, and any optics on your other barrels stay sighted in.
Does the barrel come with a choke, and can I use other tubes?
Yes, it ships with an extra full turkey choke that's ready to pattern dense loads for gobblers. The barrel uses the standard Browning Invector thread pattern, so you can run a wide range of aftermarket choke tubes if you want to tune your pattern for a specific turkey load.
Can I mount a scope or red dot on this turkey barrel?
You can. The top of the barrel is drilled and tapped for a scope base, making it easy to add a low-power scope or compact red dot. Many turkey hunters run an optic on these to make head shots more precise at distance.





Reviews
There are no reviews yet.