Description
A shiny objective lens is one of the fastest ways to give away where you're sitting. Bright sun catches the front glass of your 3.5×35 LED ACOG and throws a wink of light that targets and game can pick up from a long way off. The Trijicon Tenebraex KillFlash AC11033 solves that with a matte black honeycomb screen that seats over the objective and turns the front of your optic dark, all while the view from behind the scope stays crisp and clear.
What the Tenebraex KillFlash Does for Your 3.5×35 ACOG
The honeycomb structure is the whole trick here. Light passes through normally from the shooter's side, so your magnified sight picture and LED-illuminated reticle work exactly as designed, but forward reflection gets swallowed up before it can escape and betray your spot. Because it's cut specifically for the 3.5×35 LED ACOG objective housing, you get a tight, gap-free fit instead of the sloppy tolerances you find on one-size-fits-most filters. Those gaps are where glint leaks out, and this one closes them off.
Fit and Install on the LED ACOG
No tools, no fuss. The AC11033 presses straight onto the objective and an elastic retention band keeps it snugged down so it doesn't wander or rattle loose under recoil. Owners have noted that the band does a nice job locking out wiggle once it's clipped on the sides properly, which matters when your ACOG lives on a rifle that sees real field use. It's the factory Trijicon accessory built for this exact model, so you're not gambling on whether the diameter lines up.
Built to Live Outside
Beyond hiding your position, the KillFlash acts as a shield for the objective glass, taking the hits from sand, dust, brush, and grime that would otherwise land on your lens. It's a lightweight, matte polymer piece that adds protection without changing how the optic handles. If your ACOG earns its keep in bright, open country, this is a small add-on that pulls real weight.
Key Specifications
- Manufacturer: Trijicon
- Manufacturer Part Number: AC11033
- UPC: 719307314269
- Fits: 3.5×35 LED ACOG
- Objective Size: 35mm
- Accessory Type: Anti-Reflection Device (Killflash)
- Color: Black
- Material: Matte polymer with honeycomb filter
- Retention: Elastic band, tool-free install
- Warranty: Limited Lifetime Warranty
What’s Included
- Trijicon Tenebraex KillFlash Anti-Reflection Device for 3.5×35 LED ACOG (AC11033)
Frequently Asked Questions
Will this Tenebraex KillFlash fit my ACOG?
This AC11033 is built specifically for the Trijicon 3.5×35 LED ACOG objective, so it's a precise match for that model. If you run a different ACOG configuration, like the 4×32 or the smaller magnification versions, you'll want the anti-reflection device made for that particular optic. Matching the right ARD to the right objective is what gives you a snug, gap-free fit.
Does the KillFlash hurt the sight picture or dim the reticle?
No. The honeycomb design lets light pass normally from the shooter's side, so your magnified view stays clear and the LED-illuminated reticle performs the same as it does without the device. The filter only blocks reflection escaping out the front. You may notice a very slight reduction in light in extremely dim conditions, which is normal for any honeycomb ARD.
How does the Tenebraex KillFlash stay on under recoil?
It presses directly onto the objective housing and is held in place by an elastic retention band that keeps it from wiggling or getting knocked off. Make sure it clips down on the sides during install and it locks in nicely. Owners report it holds up through hard field use and repeated recoil.
Do I need any tools to install it?
None at all. The KillFlash seats over the objective and secures with its band, so it's a quick hand install with nothing to torque or screw down. That also means you can pull it off just as easily when you don't need the anti-glint protection.




Reviews
There are no reviews yet.