Description
Taurus brought the 650 back after years of people asking for it, and this 3-inch stainless version might be the smartest way to get one. The fully shrouded hammer is the heart of the design. With nothing sticking up off the frame, there is nothing to hang up on a jacket, a cover shirt, or the lip of a pocket, so the draw comes out clean every time. That smooth, rounded top end also helps the gun disappear under clothing, which matters more than most folks realize until they have carried a hammer-spur revolver for a while.
Why the 3-Inch Taurus 650 Makes Sense
The extra inch of barrel over the standard snub buys you real advantages. You get a longer sight radius for more forgiving aim, a bit more velocity out of magnum loads, and a touch of added weight up front to settle recoil. The stainless steel frame and cylinder shrug off sweat and weather, which is exactly what you want in a gun that rides close to the body all day. It wears a removable serrated blade front sight with a fixed notch rear, simple and tough with nothing to knock out of adjustment, and the rubber grip gives your hand something to hold onto when the magnum loads start barking.
Ammo Flexibility and DAO Simplicity
Chambered in .357 Magnum, the 650 also runs .38 Special and .38 Special +P, so you can train cheap and comfortable, then load up for serious work. The double action only trigger keeps the manual of arms dead simple: pull the trigger, it fires, every time, with a hammer spring stout enough to reliably light off magnum primers. A transfer bar safety adds peace of mind for carry.
Holsters and Speedloaders for the Taurus 650
Since the 650 shares its small-frame footprint with five-shot .357 revolvers like the Taurus 605, finding holsters and speedloaders is easy. At 22.93 ounces unloaded, it carries all day without complaint and soaks up recoil better than the airweight crowd. A well-rounded wheelgun in every sense of the word.
Key Specifications
- Model: Taurus 650
- Manufacturer Part Number: 2-650139
- UPC: 725327636489
- Caliber: .357 Magnum (also fires .38 Special / .38 Special +P)
- Action: Double Action Only (DAO)
- Capacity: 5 rounds
- Barrel Length: 3 inches
- Frame Size: Small frame
- Frame and Cylinder Material: Stainless steel
- Finish: Matte stainless
- Hammer: Fully shrouded internal hammer
- Front Sight: Removable serrated blade
- Rear Sight: Fixed notch
- Grip: Black rubber
- Weight: 22.93 oz unloaded
- Twist Rate: 1:16.5-inch RH
What’s Included
- Taurus 650 revolver
- Factory hard case
- Cable lock
- Owner's manual
Frequently Asked Questions
Can the Taurus 650 shoot .38 Special ammo?
Yes. Since it is chambered in .357 Magnum, the 650 safely fires .38 Special and .38 Special +P as well. A lot of owners practice with mild .38s to keep range time comfortable, then carry magnum or +P loads for defense. That flexibility is one of the biggest perks of a .357 wheelgun.
Can you cock the hammer on the Taurus 650 for single action shots?
No, and that is by design. The hammer is fully enclosed inside the frame, so the gun runs double action only with every trigger pull. The upside is a completely snag-free profile that draws clean from pockets, bags, and under cover garments.
Will holsters and speedloaders for the Taurus 605 fit the 650?
For the most part, yes. The 650 is built on the same small frame with a five-shot .357 cylinder, so speedloaders made for the Taurus 605 and similar small-frame five-shot revolvers work fine. For holsters, just make sure you match the 3-inch barrel length, since a lot of snub holsters are cut for 2-inch guns.
What does the 3-inch barrel on the Taurus 650 give you over the 2-inch version?
You pick up a longer sight radius, which makes accurate shooting easier, plus a bit more velocity from magnum loads and some extra nose weight that tames muzzle flip. The tradeoff in concealability is smaller than most people expect, especially for belt carry. For many folks the 3-inch is the sweet spot between shootability and carry comfort.




Reviews
There are no reviews yet.