Description
Anyone loading 6.5 Grendel for a gas gun knows the pain of a bullet creeping forward in the magazine under recoil. The Redding Taper Crimp Die (part number 85478) is the fix. Rather than curling the case mouth inward like a roll crimp, it gently squeezes the brass tighter and tighter against the bullet for a firm, even grip. The result is extra case tension that keeps your seating depth put during feeding and recoil, which is exactly what semi-auto shooters want for consistent ignition and reliable cycling.
Why the 6.5 Grendel Taper Crimp Die Earns Its Spot
Taper crimping really shines when you're loading bullets without a cannelure, since there's no crimp groove to roll into. The taper style closes the mouth down without working the brass as hard as a roll crimp, and it doesn't change your overall cartridge length in the process. For 6.5 Grendel fed through an AR platform, that added bullet grip translates to tighter, more repeatable groups and loads you can trust shot after shot.
Running the 85478 Taper Crimp Die on Your Press
This is a separate, dedicated crimp die, meaning you crimp in its own station apart from seating. A lot of reloaders prefer that setup because it gives you finer control over both operations. It threads into any standard 7/8-14 press, and setup is straightforward once you dial in where the case mouth meets the taper. Keep in mind this is a single die, not a full set, and the shellholder is sold separately.
Built the Redding Way
Redding has a long reputation for precision tooling, and this die is cut from high-grade steel to exacting tolerances right here in the United States. It's the kind of piece that stays in your die rack for the long haul, holding alignment and delivering the same clean crimp load after load. If uniformity and consistency are what you chase on the bench, this is a worthwhile step in your 6.5 Grendel process.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 85478
- UPC: 611760854781
- Caliber: 6.5 Grendel
- Die Type: Taper Crimp (Bottleneck)
- Number of Dies: 1
- Thread Size: 7/8-14
- Material: High-Grade Steel
- Bullet Diameter: 0.264 in
- Country of Manufacture: United States
What’s Included
- One Redding Taper Crimp Die (6.5 Grendel)
- Die box
- Instructions
Frequently Asked Questions
What's the difference between a taper crimp and a roll crimp for 6.5 Grendel?
A roll crimp curls the case mouth inward into a bullet's cannelure, while a taper crimp gently squeezes the mouth tighter against the bullet at an angle. The taper style doesn't work the brass as hard and won't change your overall cartridge length. It's the preferred choice for 6.5 Grendel loaded with bullets that have no crimp groove.
Do I need this die if I'm loading for an AR?
A crimp isn't mandatory, but it's a popular step for semi-auto rifles like the 6.5 Grendel AR. The added case tension helps keep bullets from being pushed deeper during feeding or walking forward under recoil, which protects your seating depth and keeps groups consistent. Many reloaders consider it a worthwhile step for reliable gas-gun ammo.
Is a shellholder included with the 85478 taper crimp die?
No, the shellholder is sold separately. For 6.5 Grendel you'll want the standard #12 shellholder. The die itself threads into any standard 7/8-14 reloading press.
Can I use this as my only sizing die?
No. This is a dedicated taper crimp die only, so it applies the crimp in its own station and does not size cases or seat bullets. You'll still need a sizing die and a seating die to complete your 6.5 Grendel load.





Reviews
There are no reviews yet.