Redding Taper Crimp Die 223 Rem (85111) – Bottleneck Reloading Die

Description

If you've ever pulled a round from the magazine of your AR and found the bullet pushed deeper into the case, you already know why a taper crimp earns its keep. The Redding Taper Crimp Die in 223 Rem adds a measured amount of grip to the case mouth, keeping bullet depth consistent round after round. That matters most for semi-auto rifles, where the motion of feeding and recoil can nudge a loosely seated bullet out of place.

Why the 223 Rem Taper Crimp Die Works Differently

A taper crimp angles the case mouth gently inward toward the bullet rather than rolling it over the way a traditional roll crimp does. The result is a uniform hold that doesn't work the brass as hard and doesn't change your overall cartridge length. That's a big deal for precision loaders who spend time getting their seating depth dialed in and don't want a crimp throwing it off. It's also the go-to method when you're loading bullets that don't have a cannelure, since there's no crimp groove to roll into.

Putting the Redding 85111 to Work

This is a dedicated crimp die, so it runs as a separate station after seating rather than doing both jobs at once. Thread it into any standard reloading press, set the amount of crimp you want, and you're off. Reloaders consistently note how easy it is to set up and how smooth and polished the internals are, which is the kind of fit and finish Redding has built its name on over the decades. Machined right here in the USA, it carries the same reputation for tight tolerances and repeatable results that Redding dies are known for.

If you're loading 223 for a gas gun or working with mixed headstamp brass on a progressive press, a taper crimp brings welcome peace of mind. Keep in mind you'll need the correct shellholder for 223 Rem, which is sold separately, to run this die on your press.