Description
When it comes to bore cleaning, the patch itself does more heavy lifting than most folks give it credit for. The Tapco TAP22073 is a 2.25-inch square patch cut from 100% cotton flannel, sized to run through .38 to .45 caliber bores and the chambers that come with them. That covers a big chunk of the handgun world, including .38 Special, .357 Magnum, 9mm, .40, 10mm, and .45, so one pack handles a whole safe worth of pistols.
What Makes the TAP22073 Square Patches Worth Keeping Around
What sets these apart is the extreme absorbency finish applied to both sides. That treatment lets the flannel soak up solvent and carry fouling, oil, and residue out of the barrel instead of just smearing it back around. The soft weave grips debris while staying gentle on the rifling, which is exactly what you want when you're running patch after patch during a deep clean. Square patches also fold nicely over a jag, giving you even contact around the bore for a more thorough wipe.
Getting the Right Fit With the Tapco 2.25" Patches
Patch sizing is all about fit. Too small and it slips past the fouling without doing much, too big and you're fighting a stuck jag halfway down the barrel. At 2.25 inches square, this size lands in the sweet spot for .38 through .45 bores, giving you firm, even resistance rather than a loose glide. If you run a smaller bore like .22 or .30, Tapco makes matched sizes for those too, so it pays to grab the count that fits your setup.
Why 250 Count Makes Sense
Cleaning patches are a consumable, and a proper session eats through more than most expect between wet and dry passes. A 250-count pack means you're not rationing patches or cutting a clean short because you ran low. Toss them in your range bag or cleaning kit and you're set for a long stretch of maintenance without another supply run.
Key Specifications
- Manufacturer: Tapco
- Manufacturer Part Number: TAP22073
- UPC: 810122800705
- Patch Shape: Square
- Patch Size: 2.25 in
- Material: 100% Cotton Flannel
- Caliber Range: .38 – .45 Cal
- Finish: Extreme absorbency, both sides
- Quantity: 250 CT
- Intended Use: Bore and chamber cleaning
What’s Included
- 250 count pack of 2.25" square cotton flannel cleaning patches
Frequently Asked Questions
What calibers do the Tapco TAP22073 square patches fit?
These 2.25-inch patches are sized for .38 through .45 caliber bores and chambers. That covers common handgun rounds like .38 Special, .357 Magnum, 9mm, .40, 10mm, and .45. For smaller bores such as .22 or .30, Tapco offers matched patch sizes that fit those diameters better.
Are these cotton flannel patches good for both wet and dry passes?
Yes. The extreme absorbency finish on both sides lets the flannel soak up solvent for your wet passes and then dry the bore out on the follow-up passes. A typical cleaning routine runs a solvent-soaked patch first, then dry patches until they come out clean, so having 250 on hand keeps you covered through the whole process.
How do I use these square patches with a jag?
Center the square patch over the tip of your jag and push it through the bore so it grips the rifling with firm, even resistance. The square shape folds cleanly around the jag for good all-around contact. You want it snug but not so tight that you're forcing the rod, which can lead to a stuck jag.
Why choose a 250-count pack?
Patches are a consumable, and a proper deep clean can burn through a surprising number between wet and dry passes. A 250-count pack means you won't run short mid-session or have to ration them. It's a practical bulk option for anyone who cleans regularly or maintains more than one firearm.





Reviews
There are no reviews yet.