Description
Cleaning patches are one of those supplies you never want to run low on, and the Tapco TAP22072 gives you a healthy stack of them to work through. These are 1.75-inch square patches cut from 100% cotton flannel, sized to run bores from 7mm and 8mm up through .30, .338, .35, and .38 caliber. That range covers a lot of popular chamberings, so a single bag handles everything from a .30-caliber rifle to a .357 Magnum or .38 Special wheelgun.
Why Cotton Flannel Does the Heavy Lifting in the TAP22072
There is a reason flannel has been the go-to patch material for generations. The soft, napped weave grabs solvent and pulls carbon, copper, and powder fouling out of the bore without scrubbing hard against the rifling. Tapco finishes both sides of these patches for extra absorbency, so you get useful cleaning surface no matter which way the patch loads onto your jag. Fewer wasted passes means less time at the bench and more time doing what you actually bought the gun for.
Getting the Right Fit With the TAP22072 Square Patches
Square patches give you a little more surface area than round ones, and a lot of folks who clean regularly prefer them because you can offset the jag toward a corner for a tighter fit in the bore. If a patch feels too loose, load it closer to an edge; too tight, center it up. Pair these with a caliber-appropriate jag and they wrap cleanly for both wet solvent passes and dry finishing swabs.
At 500 patches per bag, this is a stock-up quantity rather than a quick one-off. Keep them near your cleaning kit and you will have patches on hand for months of range trips, hunting seasons, and routine wipe-downs. For anyone who owns more than a couple of firearms in this caliber window, buying in bulk like this just makes life easier.
Key Specifications
- Manufacturer: Tapco
- Manufacturer Part Number: TAP22072
- Model: Cleaning Patches
- UPC: 810122800699
- Patch Shape: Square
- Patch Size: 1.75 in (1-3/4 in)
- Material: 100% Cotton Flannel
- Finish: Double-sided extreme absorbency
- Caliber Fit: 7mm-8mm, .30, .338, .35, .38
- Quantity: 500 Count
- Country of Origin: Made in USA
What’s Included
- 500 Tapco 1.75" square cotton flannel cleaning patches
Frequently Asked Questions
What calibers do the Tapco TAP22072 square patches fit?
These 1.75-inch square patches are sized for bores from 7mm and 8mm up through .30, .338, .35, and .38 caliber. That makes them a good match for popular chamberings like .30-caliber rifles, 7.62mm, .300 Blackout, .357 Magnum, and .38 Special. Pairing them with the correct caliber jag will give you the best fit.
Are square patches better than round for cleaning?
It comes down to preference and fit. Square patches give you a bit more surface area, and many people who clean often like them because you can offset the jag toward a corner to fine-tune how tight the patch rides in the bore. Round patches are popular too, so a lot of it depends on your jag and how snug you want the pass to feel.
What are the Tapco TAP22072 patches made of?
They are cut from 100% cotton flannel with a napped, double-sided finish for strong absorbency. Cotton flannel is a longtime favorite for patches because it soaks up solvent and carries fouling out of the bore with minimal abrasion against the rifling.
How many patches come in a pack?
Each bag holds 500 patches, so this is a stock-up quantity rather than a small one-off pack. If you clean regularly or keep several firearms in this caliber range, a bag like this will last a good while.




Reviews
There are no reviews yet.