Description
The factory Glock magazine base pad is one of those things that works fine until it doesn't. When a mag hangs up in the well under stress or in rough conditions, that smooth little pad gives you almost nothing to work with. Larry Vickers and TangoDown set out to fix that with a drop-in replacement that looks simple but makes a real difference when it counts.
The flared profile and grooved finger scallops give you a solid surface to strip a stubborn magazine, whether you're dealing with mud, sand, ice, or just sweaty hands on a hot day at the range. You can also hook the floor plate under a belt or against a gear pouch for a fast one-handed reload, which is a technique a lot of serious trainers teach but is nearly impossible with the stock pads. Installation swaps right in using your existing Glock magazine spring and retainer plate, no tools or modifications needed.
The molded dimples on the bottom of each plate are a small but useful touch. If you're running several mags on rotation, you can number or mark them with a paint pen to track round count or identify your carry mags at a glance.
This pack covers Glock magazines chambered in 9mm, .40 S&W, .357 SIG, and .45 GAP, and is compatible with Gen 5 models including the G17, G19, G19X, G26, G34, and G45. Note that these are not compatible with early Gen 1 non-metal-lined magazines. They're made in the USA from tough glass-filled nylon, and the pack of five makes sense since anyone running a Glock seriously probably has at least that many mags in rotation.
Key Specifications
- Manufacturer: TangoDown
- MPN: VTMFP-001
- UPC: 955727100420
- Color: Black
- Material: Glass-Filled Nylon
- Dimensions: 1.55" L x 1.45" W
- Quantity: 5-Pack
- Compatible Calibers: 9x19mm, .40 S&W, .357 SIG, .45 GAP
- Compatible Gen 5 Models: G17, G19, G19X, G26, G34, G45
- Not Compatible With: Early Gen 1 non-metal-lined Glock magazines
- Country of Origin: USA
- Product Type: Magazine Base Plate
What’s Included
- 5x TangoDown Vickers Tactical Magazine Floor Plates (Black)
Frequently Asked Questions
Do these Vickers Tactical floor plates replace the entire magazine base assembly or just the outer plate?
They replace only the outer floor plate itself. You reuse the factory Glock magazine spring and retainer insert that are already in your magazine. Installation is straightforward and requires no tools beyond what it normally takes to disassemble a Glock mag.
Will these fit my Gen 5 Glock magazines?
Yes, the Vickers Tactical floor plates are confirmed compatible with Gen 5 models including the G17, G19, G19X, G26, G34, and G45. They are not compatible with early Gen 1 Glock magazines that lack a metal magazine tube liner.
What calibers do these floor plates fit?
These fit Glock magazines chambered in 9mm (9×19), .40 S&W, .357 SIG, and .45 GAP. They do not fit the larger-frame .45 ACP or 10mm Glock magazines, so double-check your specific caliber before ordering.
Will these add noticeable bulk and affect concealed carry?
The flared profile does extend slightly beyond the factory pad, but the size difference is minimal. Multiple users running these on carry setups have noted they don't cause a meaningful increase in printing compared to stock base pads.
What are the molded dimples on the bottom of each plate for?
The small concave dimples are designed so you can number or mark your magazines with a paint pen or marker. It's a practical feature if you track round count across several mags or want to quickly identify your carry magazines from your range spares.
Why does this come in a 5-pack instead of sold individually?
TangoDown packages these in packs of five because most people running a Glock for serious use tend to have multiple magazines in rotation. It's more cost-effective that way, and it makes sense to upgrade your whole mag set at once rather than mixing old and new base pads.






Reviews
There are no reviews yet.