Description
Getting the most out of a Tikka T3 or T3X usually means ditching the factory dovetail setup and moving to a true MIL-STD-1913 Picatinny base, and this Talley rail is one of the cleaner ways to do it. It gives you a full action-length platform with a built-in 20 MOA of forward cant, which buys back elevation travel in your scope so you can dial farther without running out of adjustment. The recoil pins are the detail that sets this one apart, keeping the rail planted under repeated recoil instead of relying on screws alone.
What Makes This Talley Tikka Rail Worth Running
Talley machines these in the United States from high-grade 7000 series aluminum, then finishes them with a matte black hard-coat anodize rated to 65 Rockwell. That combination keeps the rail light without giving up durability, and the finish holds up to field use, weather, and the normal knocks that come with a hunting or range rifle. Because it is cut to MIL-STD-1913 spec, it accepts the wide world of Picatinny rings and accessories, so you are not locked into any one brand of optic mount.
Why the 20 MOA Cant Matters on a T3/T3X
The 20 MOA angle tilts your optic slightly downward toward the muzzle, which shifts your usable elevation range out to distance. If you shoot past a few hundred yards or run a scope with limited internal travel, that extra built-in slope is the difference between dialing a long shot and topping out your turret. For closer-range work it still zeros fine, so it is a smart default for anyone who wants room to grow into longer shooting.
Installation on Your Tikka
This is the action-length version, meaning it covers the full receiver footprint for maximum ring spacing and a stable two-ring setup. It bolts directly to the T3 and T3X receiver and ships with the mounting screws and a wrench to get it torqued down, plus the recoil pins for that extra bite. A dab of thread locker and even torque across the screws will have it ready to zero in minutes.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: P0M714A
- UPC: 810301026193
- Rifle Fit: Tikka T3 / T3X bolt-action
- Mount Type: Picatinny Rail (MIL-STD-1913)
- Cant: 20 MOA
- Length Type: Action Length
- Material: 7000 Series Aluminum
- Finish: Matte Black Hard-Coat Anodize (65 Rockwell)
- Hardware: 6-48 Screws, T-15 Wrench, Recoil Pins
- Country of Origin: USA
- Shipping Weight: 0.215 lbs
What’s Included
- Talley Tikka T3/T3X action-length Picatinny rail (20 MOA)
- Recoil pins
- Mounting screws (6-48)
- T-15 wrench
Frequently Asked Questions
Will this Talley rail fit both the Tikka T3 and T3X?
Yes. This base is designed to fit both the Tikka T3 and T3X bolt-action receivers. The mounting pattern and recoil pins line up with both rifles, so you do not need a separate part for the newer T3X.
What does the 20 MOA on this Tikka Picatinny rail do for me?
The 20 MOA cant tilts the optic slightly forward, which frees up elevation in your scope for longer shots. If you shoot at distance or run an optic with limited internal travel, it lets you dial farther before running out of adjustment. It still zeros fine at normal hunting ranges.
What hardware comes with the rail, and do I need rings too?
The rail ships with the mounting screws, a T-15 wrench, and recoil pins to lock it to the receiver. Rings are not included, so you will want a set of Picatinny rings sized to your scope tube. Since it is cut to MIL-STD-1913 spec, nearly any standard Picatinny rings will work.
What is the benefit of the action-length version over a shorter base?
The action-length rail covers the full receiver footprint, which gives you more room to space your rings for better stability and balance. That wider ring spacing is especially helpful with larger or longer scopes. It also gives you more slots to fine-tune eye relief.




Reviews
There are no reviews yet.