Description
Tikka owners know the factory dovetail setup leaves a lot of good optics on the bench, and this Talley Picatinny rail fixes that in a hurry. It converts your T3 or T3X receiver into a true MIL-STD-1913 platform, so you can run just about any Picatinny ring or mount you want. This is the 0 MOA, action-length version with recoil pins, giving you a compact, no-flex foundation that keeps your scope locked in place.
Talley machines these rails entirely from high-grade 7000 series aluminum, then finishes them with a matte black hard-coat anodizing rated to 65 Rockwell. That combination keeps the rail light at right around 2.2 ounces while shrugging off the kind of wear and weather that comes with a working hunting or range rifle. The fit is where Talley really earns its name, since these are cut to some of the tightest tolerances in the business and drop onto the Tikka footprint cleanly.
Why the Action-Length Rail Makes Sense on a Tikka
The shortened action-length design measures about 6.29 inches overall and sits right over the receiver instead of hanging out past it. That trims weight and bulk compared to a full-length rail, and the built-in recoil pins give it extra insurance against the rail shifting under hard-recoiling cartridges. If you want your T3X to stay trim and balanced, this is the version to grab.
Getting Your Optic Dialed on the Talley Tikka Rail
Setup is straightforward. The rail ships with the correct 1/4 inch 6-48 screws and a T-15 wrench, so you've got what you need to mount it right out of the package. A dab of thread locker on the screws and a calibrated torque wrench are smart additions when you're bolting it down. At a flat 0 MOA, this base is ideal for general hunting, plinking, and medium-range work where you want a true zero without built-in elevation bias. Pair it with a set of quality Picatinny rings and your Tikka is ready for whatever glass you want to run.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: P00714A
- UPC: 810301026186
- Mount Type: Picatinny Rail (MIL-STD-1913)
- Fits: Tikka T3 and T3X bolt-action rifles
- MOA Incline: 0 MOA (Standard)
- Rail Length: Action Length
- Overall Length: 6.29 in
- Material: 7000 Series Aluminum Alloy
- Finish: Matte Black Hard-Coat Anodized, 65 Rockwell
- Front/Rear Height: .380 in
- Weight: 2.2 oz
- Recoil Pins: Yes
- Mounting Screws: 1/4 in 6-48 (T-15)
- Origin: Made in USA
What’s Included
- Talley Tikka T3/T3X action-length Picatinny rail (0 MOA)
- Recoil pins
- 1/4 in 6-48 mounting screws
- T-15 wrench
Frequently Asked Questions
Will this Talley Picatinny rail fit both the Tikka T3 and T3X?
Yes. This rail is designed to fit both the Tikka T3 and the T3X short and long action receivers that share the standard Tikka footprint. It drops right onto the factory drilled and tapped holes with the included hardware.
Is this the 0 MOA or 20 MOA version?
This SKU, part number P00714A, is the 0 MOA standard version with no built-in elevation angle. That makes it a great all-around choice for hunting and medium-range shooting. If you want extra elevation for long-range work, Talley offers a 20 MOA variant under a different part number.
What hardware comes with the rail and do I need anything else to mount it?
It ships with the correct 1/4 inch 6-48 screws and a T-15 wrench, so you can bolt it on right away. A quality thread locker and a calibrated torque wrench are smart additions to get everything secure and repeatable. You'll also need a set of Picatinny rings to attach your scope.
What are the recoil pins for?
The recoil pins sit in the receiver and keep the rail from creeping backward under recoil. On hard-kicking Tikka chamberings, this adds extra insurance that your zero stays put over time. It's one of the reasons this Talley base holds up so well on a working rifle.




Reviews
There are no reviews yet.