Description
Getting your optic mounted straight and solid is half the battle with any long-range setup, and Talley takes a lot of the guesswork out of it. This mount combines the scope ring and base into a single CNC-machined piece cut specifically for the Browning X-Bolt in a long or magnum length action. With no joint between the ring and the base, there's nothing to fall out of alignment and no connection to work loose under recoil. It drops right onto your receiver and clamps down a 34mm scope tube at a low ring height, which keeps the optic sitting close to the bore for a natural cheek weld and fast sight picture.
What the 20 MOA Taper Does for Your X-Bolt
The real draw here is the built-in 20 minutes of angle. That forward cant gives your scope extra elevation to work with, so you've got more dial-up range for stretching your X-Bolt out to distance before you run out of adjustment in the turret. If you're shooting a magnum chambering and like to reach past where your rifle came zeroed from the factory, this is the kind of detail that makes a difference downrange.
Built From Aircraft-Grade Alloy, Finished in Burnt Bronze
Talley machines these from high-grade lightweight aircraft aluminum to tight tolerances, which gives you the strength you need while keeping weight down compared to steel ring-and-base setups. The Burnt Bronze Cerakote finish is a nice match for X-Bolt Hell's Canyon rifles and anything wearing a bronze cosmetic. Because the mount is cut as one rigid unit, there's no lapping required and no fussing to get the rings true. You just set it, torque it down, and get back to the range.
A Clean, Repeatable Platform
For hunters and range shooters who want a mounting solution that holds zero and doesn't add extra steps, this Talley mount earns its spot. The low height suits slimmer objective scopes and keeps the whole rig compact and balanced in the hand.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: HC830735LM
- UPC: 810301025073
- Rifle Fitment: Browning X-Bolt (Long/Magnum Action)
- Scope Tube Diameter: 34mm
- Ring Height: Low
- Elevation Taper: 20 MOA
- Design: One-piece integrated ring and base
- Material: Aircraft-grade aluminum alloy
- Finish: Burnt Bronze Cerakote
- Mounting Hardware: (8) 1/4 inch 6-48 screws, T-15
- Lapping: Not required
- Origin: Made in the USA
- Shipping Weight: 0.245 lb
What’s Included
- Talley one-piece X-Bolt scope mount (pair of integrated rings)
- (8) 1/4 inch 6-48 mounting screws
- T-15 wrench
Frequently Asked Questions
Will this Talley mount fit my Browning X-Bolt?
This mount is machined specifically for Browning X-Bolt rifles built on a long or magnum length action. Make sure your action length matches, since short and super short action X-Bolts use a different version. It's cut for 34mm scope tubes at a low ring height.
What does the 20 MOA on this X-Bolt mount actually do?
The 20 MOA is a built-in forward taper that tilts your scope slightly downward at the muzzle end. That gives you extra elevation to dial up for longer distances before you max out your turret's internal adjustment. It's a popular choice for folks who want to reach well past their factory zero.
Do I need to lap these Talley rings before mounting my scope?
No. Because the rings and base are machined as one solid piece to tight tolerances, the rings are already aligned and ready to go. Lapping isn't required, and Talley notes that lapping actually voids the warranty, so you can mount your optic straight out of the box.
Will this 34mm low mount clear a large objective scope?
The low ring height keeps the optic sitting close to the bore, which is great for a compact setup and natural cheek weld. If you're running a scope with a large objective bell, double check the clearance, since bigger objectives often pair better with a medium or high mount. For standard and slimmer objectives, the low height works well.





Reviews
There are no reviews yet.