Description
Talley built this mount to take the guesswork out of setting up a Browning X-Bolt for distance work. It's a single piece of aircraft-grade aluminum where the ring and base are machined as one unit, so there's no separate base to align or a seam between parts that can work loose under recoil. For the X-Bolt specifically, that matters, since the rifle uses its own receiver screw pattern and this mount bolts straight to the factory holes on short and super short action rifles.
The standout here is the 20 MOA of forward cant machined right into the rings. That built-in angle gives your scope more usable elevation travel, which is exactly what you want when you're reaching past where the rifle and load were originally zeroed. If you've ever run out of adjustment dialing up for a long shot, this is the fix. Pair it with a quality 30mm scope and you've got real room to work with at distance.
Why the Talley X-Bolt 20 MOA Mount Earns Its Keep
This is the High ring height version in 30mm, which gives you clearance for larger objective bells and bigger turret housings without crowding the barrel or the bolt handle. It's worth a quick test fit to confirm your bolt clears before you button everything down. The Burnt Bronze Cerakote-style finish is a clean match for Browning's Hell's Canyon and other bronze-accented X-Bolt models, so your optic setup looks like it belongs rather than being an afterthought.
Machined Right, No Lapping Needed
Talley holds these to tight tolerances and does not recommend lapping, in fact lapping voids the warranty. They're ready to go out of the box. Everything you need to mount up comes in the package, including the 6-48 screws and a T-15 wrench. Talley lists 17 to 20 inch-pounds on the ring cap screws, and base screw torque depends on the receiver, so confirm with Browning and always stay inside your scope maker's limits on the main tube. A long-shank T-15 bit makes life easier if you're using a torque driver.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: HC750735SM
- UPC: 876430000855
- Fits: Browning X-Bolt Short / Super Short Action
- Ring Diameter: 30mm
- Ring Height: High
- Built-in Cant: 20 MOA
- Finish: Burnt Bronze
- Material: Lightweight Aircraft-Grade Aluminum
- Construction: One-Piece Integrated Ring and Base
- Mounting Screws: 6-48 (T-15)
- Ring Cap Screw Torque: 17-20 in/lb
- Lapping: Not Required (lapping voids warranty)
- Origin: Made in USA
- Shipping Weight: 0.255 lb
What’s Included
- Talley one-piece ring and base mount (set)
- 6-48 mounting screws
- T-15 wrench
Frequently Asked Questions
Will this Talley mount fit my Browning X-Bolt?
This version is machined for Browning X-Bolt short and super short action rifles and bolts directly to the factory receiver holes. The X-Bolt uses its own screw pattern, so if you have a long or magnum action X-Bolt, you'll want the long/magnum version instead. It's always smart to confirm your action length before ordering.
What does the 20 MOA do on this mount?
The 20 MOA is a forward angle machined into the rings that gives your scope more usable elevation travel. That extra built-in cant lets you dial up for longer shots without running out of adjustment in your turret. It's a popular setup for folks wanting to reach past typical hunting distances with their X-Bolt.
Do I need to lap these rings before mounting my scope?
No. Talley holds these to tight tolerances and specifically does not recommend lapping, and doing so actually voids the warranty. They're ready to install straight out of the box.
What size scope and tube does this fit?
This is the 30mm diameter version in High ring height, so it pairs with any scope using a 30mm main tube. The High height leaves room for larger objective bells and bigger turrets, though it's worth a quick test fit to make sure your bolt handle clears before final torque. Everything you need to mount up, including 6-48 screws and a T-15 wrench, comes in the box.



Reviews
There are no reviews yet.