0
0

Talley Browning X-Bolt Scope Mount 30mm High 20 MOA Long/Magnum Smoked Bronze

UPC: 810301025035

$97.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Talley built this mount to do one job and do it right: get a 30mm scope locked onto a Browning X-Bolt long or magnum action with no fuss and no slop. Instead of the usual separate base and ring setup, the ring and base are machined as one continuous piece. That means there's no joint to wiggle loose or fall out of alignment over time, which is exactly what you want when you're reaching out past where most hunters usually stretch.

The real draw here is the 20 MOA of elevation cant built right into the mount. That extra angle gives your scope more usable up-travel, so you can dial for longer shots without running out of adjustment inside the turret. Pair that with the high ring height and you've got good clearance for larger objective bells and the bigger scopes folks tend to run on long-range X-Bolt builds.

What Sets the Smoked Bronze X-Bolt Mount Apart

These are fully CNC-machined from high-grade aircraft-grade aluminum, so they hold tight tolerances while keeping weight down compared to steel rings and bases. The Smoked Bronze finish is a nice touch if you're trying to match a bronze or earth-tone rifle, and it holds up well against handling and the elements. Because everything is cut as a single unit, there's no lapping required, which saves you a step and gets you to the range faster.

Fitting the X-Bolt 30mm High Mount to Your Rifle

This particular setup is cut for Browning X-Bolt long and magnum length actions, so double-check your action length before ordering. It's designed to bolt directly to the receiver using the factory screw holes, and it ships as a matched pair with the hardware you need to get it done. If you're building out a long-range X-Bolt in something like 7 PRC, 300 Win Mag, or a similar magnum chambering, this is a clean, proven way to anchor your glass.

Key Specifications

  • Manufacturer: Talley
  • Manufacturer Part Number: SB750735LM
  • UPC: 810301025035
  • Fits: Browning X-Bolt Long/Magnum Action
  • Ring Diameter: 30mm
  • Ring Height: High
  • Built-In Cant: 20 MOA
  • Design: One-Piece Integrated Ring and Base
  • Material: Aircraft-Grade Aluminum, CNC-Machined
  • Finish: Smoked Bronze
  • Front Height: .640"
  • Rear Height: .746"
  • Lapping: Not Required
  • Country of Origin: Made in USA
  • Shipping Weight: 0.255 lbs

What’s Included

  • Pair of Talley one-piece scope mounts (ring and base)
  • (8) 1/4" 6-48 mounting screws
  • T-15 wrench

Frequently Asked Questions

Will this Talley X-Bolt mount fit my rifle?

This set is cut specifically for Browning X-Bolt rifles built on long and magnum length actions. It bolts directly to the receiver using the factory screw holes. If your X-Bolt is a short or super short action, you'll want the short-action version instead, so check your action length before ordering.

What does the 20 MOA built into the mount do for me?

The 20 MOA cant angles the scope slightly downward toward the muzzle, which frees up more elevation travel inside your scope for longer-range shots. It lets you dial up for distance without maxing out your turret. If you're running a long-range X-Bolt build, that extra up-travel is a real benefit.

Does this mount require lapping before installation?

No. Because the ring and base are machined as one continuous piece from solid aluminum, the alignment is set at the factory and no lapping is needed. You can bolt it on and mount your scope straight out of the box. Talley actually notes that lapping these voids the warranty, so there's no reason to.

Will the high ring height work with a large scope?

The high height gives you more clearance under the scope, which is handy for larger objective bells and bigger tactical-style scopes common on long-range rigs. For most 30mm scopes with a 50mm or larger objective, high rings are a safe bet. It's always worth measuring your objective bell against the barrel contour to confirm clearance.

Additional information

UPC

810301025035

Manufacturer

Manufacturer Part Number

SB750735LM

Shipping Weight

0.255

Reviews

There are no reviews yet.

Be the first to review “Talley Browning X-Bolt Scope Mount 30mm High 20 MOA Long/Magnum Smoked Bronze”