Description
Running a pump gun dry in the middle of a stage or a defensive situation is no fun, and digging through a side saddle where the shell position keeps changing only slows you down. The TactaLoad Flash-5 solves that by building a five-round internal magazine right into your Remington 870 buttstock. The rounds sit captive inside the stock, protected from the elements and safe from getting knocked loose under recoil, and they present in the exact same place every single time you reach for one.
What Sets the Flash-5 Buttstock Apart
The magic is in the simplicity. The Flash-5 uses an internal five-round magazine oriented upside down in the stock, so you load shells with the brass facing forward and pull them straight out when you need them. A spring-loaded gate and friction hold each round in place, then release with a light press when you draw. It works the same whether you're bare-handed or wearing gloves, and it's fully ambidextrous, so lefties and righties get the same experience. The internal spring is built to outlast just about anything you'll throw at it.
Fit, Feel, and Installation
This version drops onto the Remington 870 platform and holds all three common 12 gauge shell lengths at 2 3/4, 3, and 3 1/2 inches. It ships with a rubber recoil pad that gives you a 13.5-inch length of pull, and a sling swivel stud comes included so you can rig up a carry strap. Reviewers have hammered on these things, bouncing them off tires and running hundreds of reloads without a hiccup, which speaks to the rugged polymer build. If you want a shorter pull for use with a plate carrier, TactaLoad's tactical butt plate and half-inch spacers are available separately to dial in the fit.
Made in the USA and simple enough that most folks knock out the swap in about 15 minutes with basic hand tools, the Flash-5 is one of the more practical upgrades you can make to a home defense or competition 870.
Key Specifications
- Manufacturer: TactaLoad L.L.C.
- Manufacturer Part Number: TLFL5-R8712
- UPC: 860003852934
- Compatibility: Remington 870
- Gauge: 12 Gauge
- Shell Capacity: 5 rounds
- Shell Lengths: 2 3/4", 3", 3 1/2"
- Length of Pull: 13.5" with included recoil pad
- Material: Black polymer with rubber recoil pad
- Handedness: Ambidextrous, no cast
- Country of Origin: Made in USA
- Shipping Weight: 2.9 lbs
What’s Included
- TactaLoad Flash-5 buttstock (Remington 870)
- Rubber recoil pad (installed)
- Sling swivel stud
Frequently Asked Questions
What shotguns does the Flash-5 buttstock fit?
This particular version is built for the Remington 870 pump-action platform in 12 gauge. TactaLoad makes separate models for Mossberg 500/590 and Maverick 88 shotguns, so make sure you're grabbing the right one for your gun. Installation is a straightforward stock swap that most people finish in about 15 minutes.
How many shells does the Flash-5 hold and what sizes?
The internal magazine holds five extra 12 gauge rounds. It accepts 2 3/4, 3, and 3 1/2 inch shells, so you can run everything from birdshot to heavy buck and slugs. The shells load brass-forward and are held captive so they won't shake loose under recoil.
Can I adjust the length of pull on the Flash-5?
Out of the box it comes with a rubber recoil pad set at a 13.5-inch length of pull. TactaLoad offers an optional tactical butt plate that shortens the pull to around 12.5 inches, which is handy if you run a plate carrier. Half-inch spacers are also available separately to lengthen the pull as needed.
Is the Flash-5 buttstock easy for a lefty to use?
Yes. The design is fully ambidextrous with no cast, so the shells present the same way for left- and right-handed users. Because the internal magazine keeps each round in the exact same position, you build muscle memory fast and can reload with or without gloves.




Reviews
There are no reviews yet.