$19.99
26 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The TacFire Compact Compensator is built for one job: keeping your .308 (or 7.62×51) settled between shots so you can stay on target. It runs a 3-port design that spreads gas pressure to fight muzzle flip and soak up a good chunk of felt recoil, which makes those faster follow-up shots feel a lot more natural. At 2.5 inches long and 1 inch in diameter, it sits close to the barrel and keeps your profile clean instead of hanging a big chunk of steel off the end.
This one is machined from steel and wears a heat-treated, erosion-resistant black nitride finish, so it holds up to the heat and pressure that a .308 throws at it round after round. The matte black look pairs nicely with most AR-10 barrels and blends in rather than standing out. It threads on with a 5/8×24 pitch, which is the standard for the .308 platform, and TacFire includes a crush washer so you have what you need to time and torque it down.
Install is straightforward if you've done a muzzle device before: thread it on with the included crush washer, index it so the ports face up and to the sides, and torque to spec. Folks who run these tend to notice the barrel settling faster and less punishment during longer range sessions, especially with a rifle that's already fighting climb. It's a sensible pick for AR-10 builds, bolt guns, and precision setups where you want to track your own hits through the glass instead of losing the sight picture every shot.
Made in the USA, this compensator is a no-nonsense upgrade for anyone who wants better control on their .308 without overthinking it.
It uses a 5/8×24 thread pitch, which is the standard for .308 Win and 7.62×51 barrels, so it should thread right onto most AR-10 style rifles and many .308 bolt guns with matching threads. Just double-check your muzzle threads before ordering. If your barrel is 5/8×24, you're good to go.
TacFire markets it as a compact compensator with a 3-port design, so it works to reduce both felt recoil and muzzle rise. The ports vent gas to help settle the barrel between shots for quicker follow-ups. Think of it as a balanced device that tackles kick and climb at the same time.
The compensator ships with a crush washer, so you have the timing hardware you need to thread it on and torque it down. Beyond that, you'll want a wrench or vise setup and a torque tool to seat it properly. If you've installed a muzzle device before, this is a quick job.
The steel body carries a heat-treated, erosion-resistant black nitride finish that's built to shrug off the heat and pressure of repeated .308 fire. The matte black coating also resists wear and helps it match most AR-10 barrels. It's made to hold up round after round.
| UPC | 811261029576 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MZ10023BN |
| Model | |
| Shipping Weight | 0.239 |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.