$14.99
39 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The TacFire MAR095A is a fully ambidextrous safety selector built for AR-15 and M4 style rifles. It gives you a lever on both sides of the receiver, so you can flip between safe and fire without shifting your grip. That matters whether you shoot left-handed, run a rifle with a featureless setup, or just want to work the safety with your trigger finger while your firing hand stays put. It is machined from steel, wears a black finish, and installs for a standard 90-degree throw that mirrors the feel of the mil-spec selector you are already used to.
This one is a direct-swap part. It is interchangeable with the safety selector found in a standard lower parts kit, so if you know your way around an AR lower, this is one of the simplest upgrades you can make. The selector measures about 1.25 inches in overall length and tips the scale at roughly 0.4 ounces, keeping the footprint low and the weight negligible. Steel construction means it holds up to the constant thumbing an ambi safety takes over the life of a build.
Swapping it in is a job most folks can knock out in under fifteen minutes with a hex key. You cock the hammer, back off the pistol grip, pull the factory selector, and slide the MAR095A in with the detent groove positioned correctly, then reset the detent, spring, and grip. Worth noting: this selector does not ship with a detent and spring, so you will reuse the ones already in your lower or grab a fresh set if yours are worn.
Budget builders, southpaws, and anyone tired of rolling their wrist to reach a single-side safety will appreciate what this adds. It is a plain, functional ambi selector that keeps the stock look while opening up control from either side. For a first ambi swap or a no-frills range and truck-gun build, it hits the mark.
No, the detent and spring are not included with this selector. Most builders simply reuse the detent and spring already in their lower receiver during the swap. If yours are worn or missing, a standard AR-15 safety selector detent and spring set will work.
It is built for AR-15 and M4 style rifles and is interchangeable with the safety selector found in a standard lower parts kit. If your rifle uses a mil-spec pattern selector, this drops right in. It installs for the familiar 90-degree throw between safe and fire.
It is one of the easier AR upgrades out there. You cock the hammer, remove the pistol grip, pull the old selector, seat the MAR095A with the detent groove aligned, then reinstall the detent, spring, and grip. Most people finish in under fifteen minutes with a hex key.
Yes. The whole point of an ambi selector is a lever on both sides of the receiver, so lefties can work the safety without shifting their grip. Right-handed shooters benefit too, since you can flip the safety with your trigger finger while keeping your firing hand planted.
| UPC | 811261020689 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MAR095A |
| Model | |
| Product Type | Safety Selector |
| Safety | Manual |
You must be logged in to post a review.
Reviews
There are no reviews yet.