$17.99
33 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Building or refreshing a rifle-length AR-15 front end usually means chasing down a couple of small parts that have to work together, and this TacFire combo saves you that hassle by pairing them in one box. You get a rifle-length stainless gas tube along with a .750 low-profile gas block, so the two most critical pieces of your gas system show up already matched for length and diameter.
The gas tube here is TacFire's MAR010, built from hardened stainless steel and treated to shrug off heat and corrosion. That matters because the tube is the artery that carries hot gas from the block straight into the bolt carrier key every time you fire. It measures 15-1/8 inches, which is the correct rifle length, and it tips the scale at right around an ounce. The tube pins into your gas block or front sight base, and no gunsmithing is required to get it seated.
The .750 gas block is sized for barrels with a .750 gas seat, which is one of the most common diameters on AR-15 barrels. Paired with the rifle-length tube, this kit is aimed at rifle-length gas systems, typically found on 20-inch and other full-length barrels. It works whether you're doing a fresh build or swapping out worn or mismatched parts on an existing upper.
Installation is straightforward for anyone comfortable with basic AR work. The block slides over the gas seat on the barrel and secures in place, then the tube pins into the block and runs back under the handguard to meet the carrier key. Take your time lining up the gas port and pin holes, snug everything down, and you've got a front end ready to cycle. It's a clean, no-drama way to knock out two parts of your build at once.
The gas block is sized for barrels with a .750 gas seat, which is one of the most common diameters on AR-15 barrels. The included tube is rifle length, so this combo is meant for rifle-length gas systems commonly seen on 20-inch and other full-length barrels. Measure your barrel's gas journal before ordering to confirm the .750 fit.
No. The gas tube pins into the gas block or front sight base, and the block secures over the barrel's gas seat with no permanent modifications. Anyone comfortable with basic AR-15 assembly and a punch set can handle it. Just take your time aligning the gas port and pin holes.
The tube is TacFire's MAR010, built from hardened stainless steel with a heat and corrosion resistant treatment. Stainless holds up well against the extreme temperatures and fouling that come with the gas path. That helps keep gas flow consistent so your rifle cycles the way it should.
Buying them together means the tube length and block diameter are already matched for a rifle-length build, so you're not guessing on compatibility. It's a convenient way to knock out two of the most important gas system parts at once. Good option for a fresh build or replacing worn, mismatched components.
| UPC | 729205989810 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MAR010750GB |
You must be logged in to post a review.
Reviews
There are no reviews yet.