$16.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This TacFire piece takes one of the more fiddly parts of an AR-15 build and hands it to you ready to go. Instead of buying a bare gas block and a loose gas tube, then wrestling the roll pin into place yourself, you get the two mated up at the factory. The .750 low-profile block clamps onto a .750 barrel journal and sits low enough to tuck cleanly under a free-float handguard, while the carbine-length tube is already seated and pinned so it lines up with a standard carbine gas port. The whole thing wears a black finish that blends in with most builds.
This is built around the .750 barrel diameter, which is the most common journal size on AR-15 barrels, and it's matched to a carbine-length gas system. That's the shortest of the common rifle-length setups and the one you'll find on a lot of 16-inch and shorter carbine builds. If your barrel has a .750 gas seat and a carbine gas port location, this is the pairing you want. It slips under low-profile and free-float rails without rubbing, which is exactly the point of running a low pro block instead of a front sight base.
Builders who've run TacFire gas parts tend to note that the fit is clean, the bends on the tube are true, and the finish comes through without dings. Because it arrives assembled and pinned, install is about as painless as it gets: set the block on the journal, index it to the gas port, snug the set screws, and pin the tube to your upper. No gunsmithing, no separate roll-pin fight. It's a straightforward, budget-friendly way to knock out the gas system on a fresh build or swap in a replacement without buying a pile of small parts.
TacFire is a US-based maker of AR-15 components, and this combo lands squarely in their value lineup, which makes it a sensible pick for a first build, a spare parts bin, or a no-drama replacement.
Yes. This is the assembled version, so the carbine-length gas tube comes installed and pinned into the block at the factory. That saves you the step of seating the tube and fighting the roll pin during your build.
It's made for barrels with a .750 inch gas journal and a carbine-length gas port, which is one of the most common combinations on AR-15 barrels. Check that your barrel's gas seat measures .750 and that the port is in the carbine position before ordering. If both line up, this drops right on.
It does. The low-profile design keeps the block tucked down close to the barrel so it clears free-float and low-profile rails without contact. That's the whole reason to run a low pro block instead of a taller front sight base.
No gunsmithing required. You slide the block onto the barrel journal, index it to the gas port, tighten the set screws, and pin the tube to your upper receiver. Since the tube is already assembled to the block, the job is mostly just mounting and alignment.
| UPC | 729205988707 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MAR008750GB |
| Shipping Weight | 0.14 |
You must be logged in to post a review.
Reviews
There are no reviews yet.