$649.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most 30 cal suppressors tap out at .308 or maybe .300 Win Mag. The Sylvan Arms SA30MD goes further, carrying a full magnum rating for cartridges up to .300 Remington Ultra Magnum. That puts it in a smaller club of cans built for the shooters running hard-hitting long-action rifles, whether that means an elk rifle in .300 Win Mag or a long-range rig pushing heavy bullets past a thousand yards.
Handling RUM-level pressure takes more than a bigger tube. The SA30MD uses an optimized baffle stack with materials chosen specifically for heat resistance and longevity under repeated magnum abuse. The exterior wears a corrosion-resistant finish that shrugs off field conditions and cleans up easily after a season in the truck or the timber. Like the rest of the Sylvan Arms suppressor line, it is designed, machined, and tested in the USA.
At 9.6 inches long and 16.7 ounces, this can sits right where a magnum suppressor should. There is enough internal volume to take real bite out of a big cartridge's muzzle blast, but not so much weight hanging off the barrel that your rifle turns nose-heavy in a shooting position. On a bolt gun with a decent profile barrel, the balance stays workable for both bench work and hunting.
The SA30MD mounts via a direct-thread 5/8×24 interface, which is the most common thread pattern on 30 cal rifle barrels. No proprietary muzzle device to buy, no locking collar to fuss with. Thread it on, torque it snug, and you get a low-profile connection that holds zero and delivers repeatable point of impact shot after shot. For precision hunters and long-range shooters who mount a can once and leave it there, direct thread is the simple, reliable answer. If your barrel already wears 5/8×24 threads, this suppressor is ready to go to work.
The SA30MD is magnum rated for 30 caliber cartridges up to and including .300 Remington Ultra Magnum. That covers popular rounds like .308 Win, .30-06, .300 Win Mag, and .300 PRC along the way. Smaller-diameter cartridges such as 6.5 Creedmoor will also pass through safely since the bullet is narrower than the bore.
No, this is a direct-thread suppressor. It screws straight onto a barrel threaded 5/8×24, which is the standard pattern on most 30 cal rifles. There is no quick-detach mount or proprietary adapter required, which keeps the setup light, simple, and repeatable.
At 16.7 ounces, it is heavier than a compact .308-only can but reasonable for a magnum-rated suppressor with 9.6 inches of internal volume. Handling magnum pressure and heat takes stouter construction, and the extra volume is what tames the blast of a big cartridge. On a typical magnum bolt gun the balance stays very manageable in the field.
Any suppressor will change your zero slightly, so plan to confirm at the range after installing it. The upside of the SA30MD's direct-thread mount is repeatability. Once it is torqued on and you re-zero, the point of impact stays consistent every time you remount it the same way.
| UPC | 811313033889 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SA30MD |
| Caliber/Gauge | 30 Cal |
| Shipping Weight | 1.3 |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.