0
0

EGW Trijicon RMR Sight Mount for S&W Revolver – K/L/N/X Frame

UPC: 841370116546

$44.99

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Adding a red dot to a Smith & Wesson revolver used to mean sending the gun off for custom machine work. EGW's mount plate skips all that. It bolts right onto the two tapped holes at the top of the frame, giving you a solid, repeatable base for a reflex sight on your K, L, N, or X Frame wheelgun. The plate is cut from 7075 aluminum and finished in a matte black Type III hardcoat anodize, so it holds up to recoil and weather without looking out of place on a serious revolver.

What the S&W RMR Sight Mount Fits

This is built around the Trijicon RMR footprint, which opens the door to a long list of popular optics. Beyond the RMR itself, it accepts the Trijicon SRO, Holosun 407C and 507C series, plus Swampfox Liberty, Justice, and Kingslayer dots. The important part to get right: your revolver has to have a factory drilled-and-tapped frame. If those two holes at the top of the frame aren't there, the plate won't have anything to anchor to.

Installing the EGW Revolver Mount

Setup is refreshingly simple. You pull the factory rear sight, set the plate in place over the tapped holes, and secure it with the included hardware using blue Loctite. From there the optic bolts straight to the plate. EGW suggests slipping a small piece of paper between the dot and the plate during install to keep Loctite off the optic and make future removal cleaner. Torque the mounting screws to 15 in/lbs and you're set.

One of the nicer things about going this route is that it's reversible. If you ever want your iron sights back, the plate comes off and your original rear sight goes right back in. It's a clean way to run a modern optic on a classic revolver platform without permanently altering the gun.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49519
  • UPC: 841370116546
  • Material: 7075 Aluminum
  • Finish: Matte Black Type III Hardcoat Anodize
  • Overall Length: 1.780 in
  • Overall Width: 1.1 in
  • Fits Frames: S&W K, L, N, and X Frame (drilled and tapped)
  • Optic Footprint: Trijicon RMR
  • Compatible Optics: Trijicon RMR/SRO, Holosun 407C/507C, Swampfox Liberty/Justice/Kingslayer
  • Number of Bases: 1-Piece
  • Color: Black
  • Made In: USA

What’s Included

  • EGW S&W revolver sight mount plate
  • (2) 6-32 flat head mounting screws
  • (1) 6-32 x 3/16 set screw

Frequently Asked Questions

Which Smith & Wesson revolvers does this RMR mount fit?

It's designed for S&W K, L, N, and X Frame revolvers. The one requirement is that the frame has to be factory drilled and tapped at the top. If your revolver doesn't have those two tapped holes, the plate won't have anything to attach to.

What red dot sights work with this EGW mount?

The plate uses the Trijicon RMR footprint, so it accepts the Trijicon RMR and SRO, along with the Holosun 407C and 507C series. It also fits Swampfox Liberty, Justice, and Kingslayer optics. If your dot shares the RMR footprint, it'll bolt right up.

Does installing this mount require a gunsmith or permanent changes to the revolver?

No permanent machine work is needed since you're using the frame's existing tapped holes. You simply remove the rear sight, install the plate with the included hardware and blue Loctite, and mount your optic. EGW recommends torquing the screws to 15 in/lbs, and the whole setup is reversible if you want your iron sights back.

Will this mount work on optics-ready S&W revolvers or the RMRcc?

This plate is intended for standard drilled-and-tapped frames, not factory optics-ready models that already have a cut. It also does not accommodate the smaller Trijicon RMRcc footprint. Stick with full-size RMR-footprint optics for the best fit.

Additional information

UPC

841370116546

Manufacturer

Manufacturer Part Number

49519

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Trijicon RMR Sight Mount for S&W Revolver – K/L/N/X Frame”