$44.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Adding a red dot to the M&P Shield EZ has never required cutting the slide, and this EGW mount is proof. It installs in place of your factory rear sight, using the existing dovetail on the slide to give you a solid, low-profile base for a micro red dot. The whole idea is simple: pull the rear sight, slide this in, and mount your optic. If you ever want to go back to irons, you just reverse the process.
This one is cut for the Docter footprint, which covers the Vortex Viper, Vortex Venom, Burris FastFire, and Docter/Noblex red dots. It's built for the S&W M&P Shield EZ in both .380 ACP and 9mm. It does not fit the standard M&P, M&P 2.0, or M&P 22, so make sure you're working with an actual Shield EZ before ordering. Worth noting too that this mount is cut for the original Viper and Venom optics rather than the newer 2025 models.
EGW machines these from 7075 aircraft-grade aluminum with a matte black hardcoat anodized finish, so it holds up to recoil and weather without griping about it. It measures roughly 1.811 inches long and just under an inch wide, keeping things compact on the slide. The dovetail uses a progressive taper, which means it starts loose and tightens as it goes, making the install a little more forgiving.
The mount installs from left to right with the muzzle pointed forward. A rear sight pusher tool makes removing the old sight and seating the new mount a whole lot easier, and it's the method most folks reach for to avoid marring the slide. You reuse the factory rear sight screw to lock it to the slide, then set your optic on top, add a drop of blue Loctite to the included screws, and torque them to 15 in/lbs. The screws need a 5/64" allen wrench. Hardware comes in the box, including button head screws for Vortex optics and flat head screws for the Burris and Docter sights.
This mount uses the Docter footprint, so it accepts the Vortex Viper, Vortex Venom, Burris FastFire, and Docter/Noblex red dots. The box includes button head screws for the Vortex optics and flat head screws for the Burris and Docter sights. Keep in mind it's cut for the original Viper and Venom, not the redesigned 2025 versions.
No. This one is made specifically for the M&P Shield EZ in .380 ACP and 9mm. It does not fit the standard M&P, M&P 2.0, or M&P 22, so confirm you're running an actual Shield EZ before ordering.
Most people handle it at home. You remove the factory rear sight, slide the mount into the dovetail from left to right, and reuse the factory rear sight screw to secure it. A rear sight pusher tool makes the job much smoother and helps you avoid marring the slide, so it's the recommended way to go.
No cutting or milling needed. The mount simply replaces your existing rear sight in the factory dovetail, which means it's fully reversible. If you ever want your iron sight back, you just pull the mount and reinstall the original.
| UPC | 841370117567 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 49292 |
| Color | Black |
| Model | |
| Style | Tactical |
You must be logged in to post a review.
Reviews
There are no reviews yet.