$95.00
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Apex Duty/Carry Kit is built for folks who want a better trigger in their M&P Shield 2.0 without swapping out the factory trigger shoe. It works by replacing the internal fire control parts, so you keep the same trigger feel under your finger while cleaning up everything happening behind it. The result is a pull that lands right around 5.5 pounds with smoother uptake, less creep, and a crisper reset that lets you get back on target faster between shots.
This is the 100-176 version, which fits Smith & Wesson M&P Shield 2.0 and Shield Plus pistols chambered in 9mm and .40 S&W. It is not made for the older Gen 1 Shield or the Shield EZ, so double check your model before ordering. One of the things people appreciate about this kit is that it does not strip out the important safety features of the pistol, and it plays nice whether you stick with the stock polymer trigger or later add the Apex Action Enhancement aluminum trigger.
Every piece in this kit is designed to work as a system. You get a fully machined sear that does the heavy lifting on pull weight and consistency, plus a fresh set of springs and the Ultimate Striker Block that ties it all together. The pull weight will vary slightly depending on your pistol's factory tolerances, which is normal, but most guns settle into that low-to-mid 5 pound range.
This is billed as a drop-in kit and most of it goes in with basic hand tools and the included Talon Tactical tool. That said, Apex strongly recommends having a gunsmith or armorer press the Ultimate Striker Block into the slide, since that step takes a bit more care. If you are comfortable detail-stripping your Shield you can tackle the rest yourself, and there are plenty of walkthrough videos out there to guide you.
This 100-176 kit is made for the Smith & Wesson M&P Shield 2.0 and Shield Plus in 9mm and .40 S&W. It is not designed for the original Gen 1 Shield or the Shield EZ, so confirm your exact model before installing. If you run a 2.0 or Plus in either of those calibers, you are good to go.
Most pistols land right around a 5.5 pound pull once the kit is in, which is roughly a two pound drop from many factory Shields. The exact weight varies a little based on your gun's factory tolerances. Beyond the weight, you will notice smoother uptake, less over-travel, and a shorter reset.
Most of the kit drops in with basic hand tools and the included Talon Tactical tool if you are comfortable detail-stripping your Shield. Apex does strongly recommend having an armorer or gunsmith press the Ultimate Striker Block into the slide, since that step takes a bit more precision. If you would rather not tackle that part yourself, a shop can handle the whole install quickly.
No. The Duty/Carry Kit is engineered to improve the trigger while keeping the pistol's built-in safety features intact. It replaces internal components rather than defeating them, which is exactly why it is a popular choice for a carry gun.
| UPC | 854263007470 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100-176 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.